PDA

View Full Version : Whirlpool



CalaBrewingCo
11-16-2011, 09:44 AM
Hi all, I'm new in this online forum, I've read it a lot but this is my first post.

I'm moving from a 1 BBL homebrewing kit in a house garage to a 5 BBL brewing system in a special rented place (for now call it a Brewery is too much).

This is a big step for me, discovering the TriClamp universe and a lot of new stuff, but it's an amazing world and I'm glad of be part of it.

I'll bothering you all with silly questions sure, so please forgive me about my newbiness.

Actually in the 1 BBL kit I made the whirpool with a stainless steel paddle in the Boiling Kettle...I was wondering how I must perform it on the new kit, Do I need a bigger paddle and the help of a couple of friends?

Please do not laugh at me!

Cheers & Regards from Argentina!

liammckenna
11-17-2011, 02:25 AM
get a bigger paddle (think oar not paddle). You should have no problem (with a little effort) moving 5 bbl into a whirlpool by yourself.

Pax.

Liam

Beachwood
11-17-2011, 10:24 AM
+1 on the paddle (oar). I know a few brewers who whirlpool with paddles on their 15bbl systems.

CalaBrewingCo
11-17-2011, 10:41 AM
Thank you all for your replies and suggestions.

What do you think about using a pump and some piping with a tangential inlet half way up kettle' side wall? This was suggested also here by a forum member, in fact the kettle does have this inlet for whirlpool.

Regards

liammckenna
11-17-2011, 11:42 AM
Pump might be overkill. Others may disagree. Make sure the impeller design offers little sheer stress. The larger the flocs, the nicer your trub pile will be.

Pax.

Liam

meadman
11-17-2011, 11:43 AM
Pump with an angled outlet half way up kettle works, but the pump shreads all your hops and trub into much finer particles, and the whirlpool cone doesn't hold together as well as using a paddle. We have a 10bbl kettle, and have not problem with the paddle.
Stroke, stroke, stroke!:D

SRB
11-17-2011, 11:47 AM
Interesting to read that brewer's on 15's use oars. I have believed upto now that pumping the whirlpool is the best way to go. Liam has more experience then I do, so I guess you learn something new everyday right? :) I will continue using a pump on our 7bbl system...old habits are hard to break ;)

gitchegumee
11-17-2011, 09:04 PM
I agree with Liam and the others that a paddle is much gentler and more effective in removing trub than a pump. Especially throttling a high speed pump also used for knockout without a VFD. My new setup is a German style three vessel system with a dedicated whirlpool under the kettle. It uses gravity drop through a tangential inlet without a pump in a broad, shallow tank. Best of all worlds, maybe.

CalaBrewingCo
11-18-2011, 03:37 AM
ay ay ay sir I will stroke as hard as I can!!! :D

Thank you all again, have a nice weekend & regards!

hallertau2000
11-18-2011, 08:30 AM
Pump with a variable speed drive so you can go slow;-)You can find the drives for a few hundred dollars these days.