90 Degree hot water rinse do not seem to be enough to clean and desinfect filler and long filler tubes. A couple of questions:
How do you clean the snift valve without a posibility to use bottles?
Do you use clorine based foaming agents on the external parts of the filler (this filler is an old one which frames are not made of SS.)?
How to circulate a cleaning agent through the filler?
My idea to rework my cleaning operations is to
After filling:
1. Cold rinse
2. hot caustic cleaning internal parts (filler bowl, filling valves) by circulating the caustic from inlet valve through a top valve of the bowl
3. cold rinse through filling tubes.
4. Remove filling tubes and "center clocks", clean them manual, desinfect the tubes with a cold acid solution
5. rinse snift valves backwards, remove snift valve and desinfect them with cold acid solution.
6. Clorine based foam on external parts of filler, when the filler got under 40 degrees celsius.
7. Rinsing external parts of filler,
Before filling:
1. Hot (90 deg celsius) rinse of filler through the filling tubes
2. Cold rinse to cold down to 10 deg celsius.
Any comments?
How do you clean the snift valve without a posibility to use bottles?
Do you use clorine based foaming agents on the external parts of the filler (this filler is an old one which frames are not made of SS.)?
How to circulate a cleaning agent through the filler?
My idea to rework my cleaning operations is to
After filling:
1. Cold rinse
2. hot caustic cleaning internal parts (filler bowl, filling valves) by circulating the caustic from inlet valve through a top valve of the bowl
3. cold rinse through filling tubes.
4. Remove filling tubes and "center clocks", clean them manual, desinfect the tubes with a cold acid solution
5. rinse snift valves backwards, remove snift valve and desinfect them with cold acid solution.
6. Clorine based foam on external parts of filler, when the filler got under 40 degrees celsius.
7. Rinsing external parts of filler,
Before filling:
1. Hot (90 deg celsius) rinse of filler through the filling tubes
2. Cold rinse to cold down to 10 deg celsius.
Any comments?
Comment