Tubing clips

[604M]

This is a really dumb question.

I am am looking to replace some broken plastic pieces that hold tubing together on our keg washer. They are the plastic clip-like pieces that keep the hoses parallel and prevent tangling.

I called McMaster Carr, and they don't know what I'm talking about. lol Does anyone have a name or a source/part number for these? I suppose zip ties might work in a pinch, but they usually move or slide down.

Thanks!

[Todd Hicks]

You will find these clips in the electrical department of your hardware store. There are screw on and self adhesive available.

[TGTimm]

To keep the hoses parallel, use two zip-ties. The first goes around both hoses, loosely, then put the second around the first between the two hoses to form a "waist". It'll take a little fiddling to get the tensions right, but the zip-ties should not slip and your hoses will stay organized. This is an old automotive trick for organizing wiring harnesses.

[sharperbrewer]

I'm sure these are overkill, but should ever need to be replaced;

http://www.summitracing.com/parts/ear-167108erl?seid=srese1&gclid=CjwKEAjw9OG4BRDJzY3jrMng4iQSJABddor15qqQBdQyjJPnEKEGROSWcGtrTiSw_z2KGp7CAIgB3xoC9aXw_wcB

[604M]

Thanks everyone. I appreciate the help!