Announcement

Collapse
No announcement yet.

size matters :)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • size matters :)

    What is the limitations on a 15bbl system with 3 - 5 fermenters per year? just loking for a rough estimate.

    Thanks & Cheers
    Dan
    Dan
    Cortland Beer Company, L.L.C.
    "Remember folks, foam is 30% beer"

  • #2
    First, what are you brewing? Ales generally ferment in 15 - 17 days. Given that and the minimum of 3 fermentation tanks, another question arises. How many different styles are you going to brew and what storage do you have available? Are you kegging or racking to serving vessels?

    Assuming:

    15bbl brewhouse, 3 - 15 bbl fermentation tanks

    You brew one batch of Ale every 8 days. You will always have one fermentation tank ready to fill, however you will be brewing, cleaning and racking to storage on the same day....long brew days. You will have produced about 675 bbl at years end, not taking into consideration spoiled batches that are dumped.

    Cheers!!

    Scott M

    Comment


    • #3
      sizing

      HI:

      David Pierce posted the text below some time ago.
      I'm sure it will be helpfull to you.

      Cheers,

      Fred



      --------------------------------------------------------------------------------

      System Sizing from the Specific Mechanical website. I'm sure most reputable manfacturers websites use a similar version:



      Calculation of Annual Production

      System Size (Brewhouse Size) x Number of brews per week x 50 weeks per year = Annual Production

      Example :10 Barrels (bbls) x 3 brews/week x 50 weeks/year = 1500 bbls/year

      Calculation of No. of Fermenters Required

      Desired Annual Production = No. of Fermenters (to meet desired annual production)
      (Brewhouse Size x Vessel Cycles/year)

      Sizing for a Brewpub - Example

      Parameters:
      "1000 barrels per year; 75% Ales, 25% Lagers"
      50 brewing weeks / year
      14 Day Ales / 28 Day Lagers with full fermentation in fermenters
      Ales - 25 cycles / fermenter / year (50 brewing weeks / 2 week fermentation)
      Lagers - 12.5 cycles / fermenter / year (50 brewing weeks / 4 week fermentation)
      6 beers on tap

      Calculate system size and number of fermenters

      For example
      3.5 barrel system 1000 barrels / year / 3.5 barrel system / 50 brewing weeks/year = 5.8 brews per week
      7 barrel system 1000 barrels / year / 7 barrel system / 50 brewing weeks/year = 2.9 brews per week
      10 barrel system 1000 barrels / year / 10 barrel system / 50 brewing weeks/year = 2 brews per week
      15 barrel system 1000 barrels / year / 15 barrel system / 50 brewing weeks/year = 1.3 brews per week

      Comment - One must look at the labor component in selecting a system size.
      Most properly sized brewpubs brew 2 - 3 times per week in their first couple of years of operation.
      "Brewing less than twice a week, the system may have been oversized to start with."
      "Brewing more than 3 times a week, the system may have been initially undersized."
      "For this example, either the 7 or 10 barrel system is recommended."

      Number of fermenters required
      Projected: 750 bbls Ales (75%) & 250 bbls Lagers (25%)

      For 7 barrel system
      Ales ------> 750 bbls / year / (7 bbls x 25 cycles/year) = 4.2 = 5 Fermenters
      Lagers ----> 250 bbls / year / (7 bbls x 12.5 cycles/year) = 2.8 = 3 Fermenters
      Total -----> 7 - 8 Fermenters to produce 750 bbls Ales and 250 bbls Lagers

      For 10 barrel system
      Ales ------> 750 bbls / year / (10 bbls x 25 cycles/year) = 3 Fermenters
      Lagers ----> 250 bbls / year / (10 bbls x 12.5 cycles/year) = 2 Fermenters
      Total -----> 5 Fermenters to produce 750 bbls Ales and 250 bbls Lagers

      Number of Serving Vessels ; Equals number of desired beer styles one wishes to serve via tank to tap.
      Note number of beer styles may increase through kegging and/or bottling.

      System Recommendation : 10 barrel system with 5 x 10 barrel fermenters and 6 x 10 barrel serving tanks.
      Selecting the 10 barrel system over the 7 barrel system has the following benefits:
      -good utilization of manpower (2 brews per week)
      -reduced floor space (5 fermenters vs. 8 fermenter)
      -better priced / more economical (fewer fermenters)
      -better expansion capabilities
      -meets all system requirements

      **Note: Double sized fermenters (and conditioning tanks) may half the number of vessels required to meet annual production.
      **Note: All calculations assume 50 brewing weeks per year**
      __________________
      Proost,
      David R. Pierce
      Director of Brewing Operations
      Bluegrass Brewing Co.
      BBC Beer Co.
      Louisville, KY

      Comment


      • #4
        For a down and dirty calculation of capacity:
        Take total fermentation capacity: 3 x 15 bbl. = 45 bbl. times 365 days in a year divided by cycle time.

        Three Unitanks: (45 x 365)/14 day cycle = 1173 bbl. max. annual production
        Five Unitanks: (75 x 365)/14 = 1955 bbl. max. annual production

        or an average of 391 bbl/year per 15 bbl. unitank maximum.

        These estimates are max. production. To hit these #'s you need to have a proper amount of serving tanks/cooperage/packaging to turn the tanks every 14 days.
        Cheers & I'm out!
        David R. Pierce
        NABC & Bank Street Brewhouse
        POB 343
        New Albany, IN 47151

        Comment


        • #5
          Dan,

          Without going through the math of the more specific methods mentioned above, I'll relate our personal experience to you.

          We have spent the last 4 years with a 15 bbl brewhouse, 4x 15 bbl fermenters and 5x 15bbl conditioning tanks. We would spend about 7-10 days in fermentation, and about the same in conditioning. We brew primarily ales and don't filter. 2,000 bbls was about the most we could do in a year.

          Comment

          Working...
          X