Announcement

Collapse
No announcement yet.

Thomsen Pump back plates

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thomsen Pump back plates

    Hello all-
    Does anyone have a supplier for back plates for some old school Thomsen pumps? I have two very abused pumps, I believe #4s, and the seat for one of the rear seals is worn clear through and the other is barely holding on. The pumps are 1.5 and .5 HP. Sorry I don't have the model numbers, I sandblasted the collars earlier and left them at my shop. They both start with 4 though.

    Attached you can see the daylight through my backplate. BTW, I didn't do this, it came as part of a lot of equipment and this is what I found when I took it apart.

    Any help is appreciated.
    Thanks,
    Adam
    Attached Files

  • #2
    Check out ZM Technologies www.zmtech.com

    Comment


    • #3
      Did you try Thomsen directly? I've bought seal kits and backplates from them directly before.

      That has to be the most worn out backplate I've ever seen!
      Linus Hall
      Yazoo Brewing
      Nashville, TN
      www.yazoobrew.com

      Comment


      • #4
        If you need Thomsen pump parts I had great luck recently working with them direct. We ordered a new back plate and it shipped out the next day.

        Contact Roberta Perez 262-652-3662 ex. 132.....service was so good I had to give them props. ;-)

        JackK

        Comment

        Working...
        X