Results 1 to 6 of 6

Thread: CO2 Line Heater for bulk tank

  1. #1
    Join Date
    Oct 2002
    Location
    usa
    Posts
    112

    CO2 Line Heater for bulk tank

    Hey Gang-

    We use NuCO2 and apparently they don't carry heated CO2 bulk tanks any longer. I've sort of gotten used to freezing up the regulators and as we've picked up brewing wise quite a bit this year it's starting to be a severe time waster and I need to fix the issue.

    I've searched the forum and know that people are using these things. I just got a quote for one that is $1500 and isn't even an off the shelf item. (Rexarc)

    I've got a 600lb tank that I think was made by Chart. Maybe I'm not looking in the right places... Suggestions? Is $1500 what I should expect to pay?

    Tash

  2. #2
    Join Date
    Nov 2002
    Location
    Mammoth Lakes, CA
    Posts
    71

    heater

    arczone.com for $125

  3. #3
    Join Date
    Nov 2002
    Location
    Mammoth Lakes, CA
    Posts
    71

    oops hyphen


  4. #4
    Join Date
    Jul 2010
    Posts
    291
    Quote Originally Posted by jbs
    Those units will keep the regulator from freezing but not the tank.

    Todd,
    I have the same tank and NuCO2 tells me the same BS.
    Shouldn't you be brewing beer?
    HK

  5. #5
    Join Date
    Jul 2010
    Posts
    291

    Hey downeast, turn on your private messages if you want a response

    Quote Originally Posted by downeast
    I saw you had an old post about issues with NUCO2. Did that ever get resolved? I am looking to use NUCO2 for bulk CO2. Would you recommend them? Any advice? If not, any alternatives you would suggest?

    Thanks,
    Matt
    We still use NUCO2 for our bulk gas needs.
    Shouldn't you be brewing beer?
    HK

  6. #6
    Join Date
    Jul 2009
    Location
    Park City, UT, USA
    Posts
    56

    Co2 heat blanke for tanks

    We are facing the same problem, but I think we are going to put in a buffer tank instead so the icing won't affect flow rates. If you truely want a heated tank ceck out these guys. I haven't purchased one but talk to them about one and it seems like it would work. Give them the specs and how many BTU's you need and they will build one for you.

    http://www.allmats.com/site/439205/page/4320676

    Good luck
    Trent
    Shades of Pale
    Park City UT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •