Results 1 to 13 of 13

Thread: 3.5bbl w/ 6 kettle BOP

  1. #1
    Join Date
    Mar 2011
    Posts
    4

    Exclamation 3.5bbl w/ 6 kettle BOP

    The doors have closed at The Brew Keeper (N. Ridgeville, OH).
    The entire brewing system is for sale. Includes the 3.5bbl steam mash tun and brew kettle as well as the 6 kettle BOP system. Also included: grain mill, keg washer, sanitary re-circulating sink, 3 bottling stations, 3.5bbl hot liquor tank, boiler, 1/2bbl corny kegs, plastic fermenters (15, 20 & 55gal). There are other misc. parts and equipment available with the system.
    Asking $45k for everything or best offer. Please contact imediately for entire setup. I will begin piecing out 3/28. All of it has to go.

    contact us: mwwise499@yahoo.com

    Basic photos are attached.
    General info:
    System is currently installed. Dismantlling will begin next week 3/28.

    3.5bbl system (mnftg Price Schonstrom manual reads 1996) is skid mounted. Skid measures approx 7' x 30". Deepest part at manway measures 48". It is 8'3" tall at top of mixing motor (6'6" w/out). asking $25,000 (includes HLT ) SOLD

    The BOP kettles are also mounted on 2 skids. The one with the control panel measrures 12' x 3' ($6,000). The other is 9'2" x 3'( $5,000) asking $11,000 for both. (includes heat exchanger and pump) SOLD
    The grain mill is 1hp 230v (motor re-built in July). asking $1500 SOLD

    The keg washer is 3ph 1hp pump. The heating element needs replaced. It measure 28" deep, 51" wide (w/ pump) or 36" w/out pump. asking $300 SOLD

    Bottling table is stainless measuring 12' x 28.5" with a table height of 37.5". asking $150 SOLD

    [/COLOR][/COLOR]
    2 Cooling room units manufactured by Copeland. 3ph One was used in a cooler (52 degrees) and has 2 fan condensor. The second was used in a cold room (35 degrees) and has a 4 fan condensor. asking $700 for both or $300 / $400 seperately. SOLD

    40 1/2bbl kegs (28 plastic 12 stainless). asking $30 each or $1000 for all SOLD

    Brewery table is a custom built wood table with black laminate top and 6 draws on each side for storage. It is on casters. asking $750. SOLD

    Bottling units are single head counter pressure fillers, They require 50PSI from compressor to operate moving parts. All connections are ball lock quick disconnects. Asking $1000 each if sold seperate from BOP SOLD

    Bottle Rinser is a 3 cycle system with a hand sink are attached. Pump driven with a hot well. Hooks right in to cold and hot water hook-ups. Comes with 2 bottle racks, each can hold 24 bottles, 12 or 22oz. asking $1000 SOLD

    Boiler built 1994. Serial #7737201 Boiler No. IN-12 Input BTU 385, Output BTU 317 SOLD

    6 steel storage racks used for grain and fermeters (2 shelves each). asking $30 each SOLD
    Attached Images Attached Images     
    Last edited by Brew Keeper; 08-30-2011 at 06:15 AM. Reason: update listing

  2. #2
    Join Date
    Mar 2011
    Posts
    1
    sent you an email

  3. #3
    Join Date
    Aug 2008
    Posts
    32
    Can you send pics of the keg washer, kegs and the bottling table?

  4. #4
    Join Date
    Feb 2010
    Location
    Plymouth, WI, USA
    Posts
    15

    Keg washer

    Sent you an email...
    It's all about the Beer.
    PlyJoe

  5. #5
    Join Date
    Mar 2011
    Posts
    4
    I maybe interested in the Hot liquer Tank and malt mill if you are going to piece this out. I would also like a price on the BOP kettles.




    kelly@51northbrewing.com

  6. #6
    Join Date
    Dec 2010
    Posts
    21

    keg washer

    Ditto on the pics for the keg washer.

    Thanks

  7. #7
    Join Date
    Mar 2011
    Location
    Las Vegas NV USA
    Posts
    3
    Interested in the kegs and condenser units. Can you send pics? Steve@plan9brewing.com

  8. #8
    Join Date
    Nov 2010
    Posts
    1

    Very interested in kegs!

    Hello,
    I will buy all of your kegs from you if they are available. I can pay you right away. I am located in colorado so not sure what the best way to ship them is but I will purchase them. Thanks, let me know!

  9. #9
    Join Date
    Dec 2010
    Posts
    137
    BrewKeeper, I just want to let you know THIS is how people selling things here should post it... keep us informed of where things are. This is really well done! Good job
    ~Phil

  10. #10
    Join Date
    Mar 2011
    Posts
    4

    Grain Mill

    Buyer for the Grain Mill has pulled out.
    It is available for sale. Asking price is still $1500.
    Buyer is responsible for shipping. I will package on a pallet ready for shipping.

  11. #11
    Join Date
    Apr 2011
    Posts
    13
    Can you send me a picture of the grain mill?

    Thanks,
    m.difabio@gmail.com

  12. #12
    Join Date
    Mar 2011
    Posts
    4

    Grain Mill

    Grain Mill is sold.
    Last edited by Brew Keeper; 04-25-2011 at 07:44 AM.

  13. #13
    Join Date
    Mar 2011
    Posts
    4

    BOP Kettles

    If you have interest in BOP kettles, let me know.
    Need to move them quickly.
    Call or email me an offer.

    440-263-1392
    mwwise499@yahoo.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •