Results 1 to 3 of 3

Thread: keg filling speed on BMS Puppy Model B?

  1. #1
    Join Date
    Aug 2003
    Location
    Victoria, B.C.
    Posts
    84

    keg filling speed on BMS Puppy Model B?

    Hi there,

    I was wondering if anyone had any experience with the racking part of the Puppy. We`re currently using the puppy just to clean and sani kegs and I then fill them with a three head counter pressure racker. The counter pressure racker can fill three kegs in about eight to nine minutes but I was wondering when fully assembled would the racking feature of the puppy be close in speed? Any advice would be greatly appreciated.

    Cheers,

    Dave Woodward
    Head (and only! Brewer
    Tofino Brewing co.

  2. #2
    Join Date
    Aug 2003
    Location
    Victoria, B.C.
    Posts
    84

    Bump!

    Bump!!!

    Just thought i`d bring this thread up to air again... So has anyone filled a keg off of a puppy before and got anything to contribute?

  3. #3
    Join Date
    Sep 2011
    Posts
    1
    it takes about 3 minutes to fill a 50L keg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •