Hi all,
I was wondering if anyone out there has had experience with programing above said controllers. I`m having a problem with getting them to cool in one degree increments.
E.G. we set the set point to 20 degrees Celsius after knocking out wort in the FV and then the controller will cool to 18 instead and when the temp rises to 21 again it will cool down 2 degrees instead of 1.
I`ll get my manual out with the programing of it later but off the top of my head the differential is set to one and everything is programed as it should
If anyone has any advice I would greatly appreciate it.
Cheers,
Dave Woodward
Tofino Brewing Co.
I was wondering if anyone out there has had experience with programing above said controllers. I`m having a problem with getting them to cool in one degree increments.
E.G. we set the set point to 20 degrees Celsius after knocking out wort in the FV and then the controller will cool to 18 instead and when the temp rises to 21 again it will cool down 2 degrees instead of 1.
I`ll get my manual out with the programing of it later but off the top of my head the differential is set to one and everything is programed as it should
If anyone has any advice I would greatly appreciate it.
Cheers,
Dave Woodward
Tofino Brewing Co.
Comment