Results 1 to 3 of 3

Thread: Angles of cylindro conical fermenters

  1. #1
    Join Date
    Mar 2005
    Location
    PERU
    Posts
    35

    Angles of cylindro conical fermenters

    HI friends, i was reading about cylindro conical fermenters and I found out that most people advice that the angle of the conical should be between 60 and 75. and my question is, when we have to use 60 or 75, relation between cylindro height and conical height is 3:1?Tx for ur help.
    Best regards
    DANNKEN

  2. #2
    Join Date
    Nov 2003
    Posts
    99
    If you are referring to the cone angle, the angle is measured from the horizontal up to the side of the cone i.e. at , say, 75o, the cone is 'steep' rather than 'shallow'

  3. #3
    Join Date
    Mar 2005
    Location
    PERU
    Posts
    35

    angles again

    I mean the the cone angle, when i should use 60 or 75?which one is better
    DANNKEN

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •