Not Sure If this belongs in the equipment forum, but we are in the process of jumping through hoops with our town. We will have public sewer and a 3-4BBL system. Brewing 1-2 times a week.
I was hoping someone could help us estimate our waste water and pollutant levels. Here is what Sewer Dept. is asking.
-gallons per day that will be discharged. Ive read anywhere fro 5-10bbl per 1bbl produced.
-conventional pollutant levels anticipated to be including ph, BOD5, total solids, dissolved solids, TSS, total phosphorus, orthophosphate, ammonia, nitrate, nitrite, oil and grease, sulfate, and sulfide, if any.
I realize that might be asking for a lot, but figured others have gone through this and might have this info on hand from their sewer dept.
Thanks for any help!!!!!
-Dave
I was hoping someone could help us estimate our waste water and pollutant levels. Here is what Sewer Dept. is asking.
-gallons per day that will be discharged. Ive read anywhere fro 5-10bbl per 1bbl produced.
-conventional pollutant levels anticipated to be including ph, BOD5, total solids, dissolved solids, TSS, total phosphorus, orthophosphate, ammonia, nitrate, nitrite, oil and grease, sulfate, and sulfide, if any.
I realize that might be asking for a lot, but figured others have gone through this and might have this info on hand from their sewer dept.
Thanks for any help!!!!!
-Dave