Epoxy Floor Covering in our Brewery
We had the same problem and just installed 3 drains in our flat floor. When you install the drains you will have to pour at least 1-2 feet of cement on each side of them for strength. Those few feet naturally will slope to your drain and we just squeege or hose the rest. We used a Rustoleum Industrial product we got from www.brewfloors.com for the covering and it works well. Not as good as a $10-15k mortar or tile option I suppose but for under $1000 to cover 1500 feet it does pretty well.
Hope that helps.
We had the same problem and just installed 3 drains in our flat floor. When you install the drains you will have to pour at least 1-2 feet of cement on each side of them for strength. Those few feet naturally will slope to your drain and we just squeege or hose the rest. We used a Rustoleum Industrial product we got from www.brewfloors.com for the covering and it works well. Not as good as a $10-15k mortar or tile option I suppose but for under $1000 to cover 1500 feet it does pretty well.
Hope that helps.
Originally posted by woohokie
View Post
Comment