Results 1 to 4 of 4

Thread: Grundy G-System

  1. #1
    Join Date
    Nov 2005
    Location
    Sigtuna, Sweden
    Posts
    4

    Angry Grundy G-System

    I have a whole bunch of 30 liter kegs fitted with the G-system type spear. I have obtained them super cheap and am starting to regret the deal. Hopefully someone here at the forum can assist me. I have no problem locating couplers but I am still unable to remove the spear from the keg. In the photos you can see that I am able to screw it out about an inch until the threads ends then its hindered from inside. If you look at the plastic (?) threading there are some peculiar "teeth" protruding from under the stainless top. I am thinking these teeth or notches are for somekind of special wrench perhaps?
    Please help if you can
    D. Meadows
    Stockholm
    Attached Images Attached Images   

  2. #2
    Join Date
    Dec 2002
    Location
    Belmont, CA, USA
    Posts
    39

    Keg Spear Removal

    There is a removal tool available from Micro Matic. It is spendy... You might try Sabco for a cheaper alternative. I just used a pry-bar and popped them out.

  3. #3
    Join Date
    Nov 2005
    Location
    Sigtuna, Sweden
    Posts
    4

    Removal tool for spears or valves

    Yeah the cost at sabco was around 2oo + bucks. I could make one I suppose but its hard to see detail just looking at a photo. Does anyone know where i could find one used? The price for shipping overseas is ghastly.
    D Meadows

  4. #4
    Join Date
    Jul 2011
    Location
    Cape Town, South Africa
    Posts
    45

    Removal tool

    Could you please post links to the pages showing the removal tools for the G-system spears?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •