Announcement

Collapse
No announcement yet.

DIY Manual Keg Washer That Grows With Your Brewery

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DIY Manual Keg Washer That Grows With Your Brewery

    Keg washers are easy to build(or start to build), like in this video

    or


    If those are for you, you can stop reading. If you are looking for a little bit more shiningness, orgranization, and expandability, continue reading.
    I am from pbst and want to offer you another option that
    1. is made of stainless steel
    2. gets you off the ground today
    3. highly configurable, and grows with your brewery.
    Here is the photo for our DIY-A(220V, 60Hz, 1.1KW pump, 2 heads configured, kegs not included, everything else is).
    Click image for larger version

Name:	DIY-A.jpg
Views:	1
Size:	81.8 KB
ID:	194269

    You can use your existing pump, or tank to work with DIY-A. It is ready!
    As your needs grow, you can buy another DIY-A or just the reservoir, or just expand the manifold to add another washing heads, etc., etc. DIY-A is built to let you change it easily!!!!!!!!!!!!
    Wait..........,
    there is more,when you are ready to do automation, contact us, we will offer our assistance to orchestrate the solenoids and air valves(to maintain quality of service, this offer is for DIY-A customers only).
    pbst sells automated keg washers, we have knowledge we can share with our customers. pbst enjoys helping our customer expand.

    Any questions, comment, contact eason at eason@pbst.com

    Cheers!
    Last edited by ekung; 05-26-2016, 10:36 AM.
Working...
X