www.microcanner.com 24 CPM Easy to Own, easy to Operate!!
We design and build an easy to afford, easy to operate, easy to own, solution to your canning needs!
Running on 110 volts, measuring just 8' long x 30" deep x 6' tall and mounted on casters, this machine can store and run just about anywhere.
Lease plans with no money down and no payments until you start canning are available to you if you qualify. Other programs are available as well.
For around $1,200 a month you can lease a full machine, with an automatic in-feed can rinser, and have just a $1 dollar buy out at the end of the lease!
(616) 745 6623
We can get you started down the path of higher profits today!
24 cans per minute
60 Cases per Hour
15 Minute set-up
15 Minute Clean-Up
Easier than the rest
Perfect fill levels
Our Advantage is Your Advantage
Because we are located in "automation alley", we enjoy having the best design engineers, the best controls engineers. We also have the highest quality CNC and Laser fabrication shops on the planet. Our staff is experienced in making the complex simple, and durable.
We have been told over and over that our system is far easier to operate than any of the others on the market.
We have studied your needs and all the other equipment out there. Our System was designed, tested, and re-designed, leaving us with a solid, robust, easy to operate machine.
Easy To Own
Once you have your own machine, you own your schedule!!
Can on your time and on your terms. If you feel like canning at midnight.....you can. If product is not ready.....wait a day or two....No more schedules!
Choose pre-printed cans from 12 cents a can (larger minimums), fill brights and apply pressure sensitive labels from 14 cents a can (small minimums), or choose shrink sleeves from 22 cents a can (small minimums).
Do the quick math and see that ownership is going to save you a bundle!
Built To Last
Take The microcanner Challenge
Last edited by microcanner; 08-23-2016 at 11:56 AM.
Is this capable of filling 16 oz. cans?
Ad renewal Bump
Thank you for supporting Probrewer.com
Tags for this Thread