Results 1 to 4 of 4

Thread: Stackable Vs. Non-Stackable Kegs

  1. #1
    Join Date
    Sep 2007
    Location
    McCall, Idaho
    Posts
    335

    Stackable Vs. Non-Stackable Kegs

    Howdy all! It's been ages since I have posted. Racking off batch 770 this am!

    I have a simple question:
    Why would you order non-stackable kegs?
    We have a mix of the 500 or so in our float (stackable and non-stackable.) In the first few years, we sourced used kegs, of any variety we could get, and they were all non-stackable. Now we only buy new, 50 L kegs, and ONLY stackable.
    I see very little reason as to why non-stackables even exist, other than being wary of stacking full kegs, which we do all the time, and safely.
    I guess if space in the dirty keg pile, space in the cooler, space in the truck etc, is not an issue, then stacking kegs would not be a big deal.
    In our little brewery, and restaurant, space is a ridiculous luxury, and being able to stack two kegs (50 liter), is something I loathe considering not being able to do.
    Anyone else order only stackables like us?
    I'm just curious, and I have been wanting to post on ProBrewer for awhile now.

    Cheers
    Matt G.
    Salmon River Brewery

  2. #2
    Join Date
    Dec 2015
    Location
    Orlando, FL
    Posts
    8

    Stackables

    I've seen stackable kegs out there and apparently if you are space constrained they may be a good deal to solve a storage issue. When shipping anywhere via a pallet though (which most of our rental customers do downstream to wholesalers) the stackable feature is of little use to a brewery or wholesaler, who tend to palletize. I have seen a few in the industry who have the storage problem you have but it's rare in North America and I believe much more prevalent in Europe. I do have a quick question though. Why did you choose to buy 50L instead of 1/2 bbls?

    Thad Avvampato
    Vice President of Sales
    Global Keg Rental

    6675 Westwood Blvd
    Orlando, FL 32821
    Office: (407) 900-9992
    Cell: (832) 276-4583
    tavvampato@globalkeg.com
    www.GlobalKeg.com

    Please visit our Booth # 605 at the NBWA Trade Show in Chicago, September 25-28, 2016

  3. #3
    Join Date
    Aug 2016
    Location
    Georgetown, Texas, USA
    Posts
    6

    Consider plastic Layer Boards for non stacking kegs, to replace stackable

    Quote Originally Posted by SRB View Post
    Howdy all! It's been ages since I have posted. Racking off batch 770 this am!

    I have a simple question:
    Why would you order non-stackable kegs?
    We have a mix of the 500 or so in our float (stackable and non-stackable.) In the first few years, we sourced used kegs, of any variety we could get, and they were all non-stackable. Now we only buy new, 50 L kegs, and ONLY stackable.
    I see very little reason as to why non-stackables even exist, other than being wary of stacking full kegs, which we do all the time, and safely.
    I guess if space in the dirty keg pile, space in the cooler, space in the truck etc, is not an issue, then stacking kegs would not be a big deal.
    In our little brewery, and restaurant, space is a ridiculous luxury, and being able to stack two kegs (50 liter), is something I loathe considering not being able to do.
    Anyone else order only stackables like us?
    I'm just curious, and I have been wanting to post on ProBrewer for awhile now.

    Cheers
    Matt G.
    Salmon River Brewery
    Hi Matt,

    One drawback of stackable kegs is the (perceived at least) easier damage to the rolling ring ... once damaged they don't work as designed. If you want to keep saving the space that you have gained by deleting 5 inch thick pallets from your keg stacks, then consider our plastic Layer Boards, exclusively from Brewery Plastics Ltd. They are only 3/4 inch thick and have the added benefits of perfectly positioning kegs in positioning rings, whilst adding more stability with retention block which fit into the chimbs above and below the Layer Boards. Plastic Layer Boards from Brewery Plastics have proven 7 year life spans, used by Breweries and by Keg Manufacturers here in the USA.

    Get in touch with me to learn more about how Layer Boards return savings in space, create stability, improve safety and lower long term costs, versus pallets.

    Cheers,

    Andrew Rhodes
    email: andrew@cypherco.com
    www.breweryplastics.biz
    Cell: 512-915-5358
    Last edited by Andrew Rhodes; 09-07-2016 at 02:26 PM.

  4. #4
    Join Date
    Sep 2007
    Location
    McCall, Idaho
    Posts
    335

    Only stackable for me

    Cheers Guys.
    Yes, once our kegs go to our distributor, the stackable feature are no longer useful (unless everyone used stackable, so the distributor, self or otherwise,could bring in multiple kegs at time, in a safer manner). We sell over half of our 1000 bbls per year in our restaurant, and with our brewhouse,no longer next door, so no serving tanks, we deliver kegs a couple blocks, so we move a lot of kegs, hence we stack like crazy, at the brewery, in our beer truck, in our cooler at the restaurant. I don't like to imagine not having the option to stack two full kegs, and having the stackbale function built in, is nice, as I do not need to buy any other equipment. We stack four clean empties high in our cooler at the brewery when we are kegging. All of that is why we like 50L too....that extra weight (nearly 20 pounds when full) is noticeable when yarding around full kegs. We charge the same price per ounce as we did when we ran with 15.5's, and we have no issue with our distribution of 50L. Out of the 300 stackable kegs we have in our float, we have 2 that have come back pinched on the bottom, and do not stack well anymore, after 4 years, since we switched to 50L stackable.

    With nearly 70% of breweries in the United States in the Brew Pub category, I would not consider space issues as rare, in the craft segment anyhow. Of the 50 here in Idaho, even the largest, like Grand Teton, are space challenged, though the larger like GT do have fork lifts. Many Brew Pubs, like us, do not have fork lifts, or automated pallet jacks, so taking two stacked kegs, that are well locked in, on a hand truck is a superior option IMO.
    Last edited by SRB; 10-18-2016 at 12:41 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •