4 BBL Steam fired turnkey brewery, fermenters and brites available...
The title says it all! This brewery has been producing award winning beers simply and efficiently for just under 3 years for us. We are planning on decommissioning this system in mid-February prior to receiving a larger system for a new space. This brewery will produce the first batch of beer on a brew day in 5 hours, with subsequent brews taking a mere 3 hours per. So you can triple batch in 11 hours total, from unlocking to walking out the door, for a typical beer with one hour mash time and one hour boil time. In the current configuration, annual production of 700 BBLs is achievable with a capacity of 2600+ BBLs a year in reach with additional fermentation capacity. The system is turnkey and we would prefer to sell it as complete. This brewery will be disassembled by a licensed contractor at our expense. Packing and shipping is at buyer’s expense but I am willing to help facilitate. It is located in Albuquerque, NM. Now for the details:
1 qty – Control panel for kettles with 3 PLC digital controllers, accurate to +1 degree/-0.5 degree F.
1 qty – Insulated, steam jacketed mash/lauter tun with false bottom and front manway, thermocouples and valves. Heated tun allows for multi-step mashing. Bridgetown Brew Systems.
2 qty – Insulated, steam jacketed boil/whirlpool/hot liquor kettles with internal calandria’s, thermocouples and valves. Lids and CIP ball included. Bridgetown Brew Systems.
1 qty – Slant Fin steam NG boiler, 250 k/btu, provides sufficient capacity to drive both boil kettles simultaneously at 5000’ altitude.
All steam header process piping, condensate receiver tank and pump, vacuum breakers, insulation, etc… Everything you need to have a code compliant installation on the hot side.
1 qty – Control panel for fermenter/unitanks with 3 PLC digital controllers, accurate to +0 degree/-.4 degree F.
1 qty – Insulated, glycol jacketed 10 BBL fermenter/unitank with front manway, top hop port, thermocouple and valves. Enough head space to hold 12 BBL. PRV and CIP ball included.
1 qty – Insulated, glycol jacketed 7 BBL fermenter/unitank with front manway, top hop port, thermocouple and valves. PRV and CIP Ball included. Enough head space to hold 8 BBls.
1 qty – Insulated, glycol jacketed 7 BBL fermenter/unitank with top manway, thermocouple and valves. You will appreciate this tank with big dry hopped beers and those with multiple dry hop additions. PRV and CIP ball included. Enough head space to hold 8 BBLs.
All glycol process piping, insulation, differential pressure bypass valve, etc… to get you up and running.
3 qty – Non-jacketed 7 BBL brite tanks with front manways, carb stones, valves and accessory ports. PRV and CIP balls included.
1 qty – 3 sq/m single stage stainless heat exchanger with sight glass and oxygenation stone.
1 qty – 1.5HP, 3 phase, 208 V, glycol chiller with 45 gallon reservoir. Sufficient capacity to cold crash all 3 fermenters to 40 F at the same time over a 24 hour period.
1 qty - ~13'x16' Walk in cooler with 4' door and 2 ton, 3 phase, 208V, compressor and single phase evaporator coils.
1 qty – 5’X8’ stainless condensate hood and 1500 cfm ventilator for drawing off steam from boil.
2 qty – 1 HP CPE portable stainless pumps with single phase, 120V, VFD drives and 1 ˝” triclover fittings.
1 qty – 2 HP Specific Mechanical portable stainless pump with 3 phase, 208V, VFD drive and 1 ˝” triclover fittings.
1 qty – Rinnai NG 300k btu tankless high temp (115-185F) water heater, used for strike, sparge or cleaning and washdown water.
1 qty – Keg cleaning and filling adapter for use with brite tanks.
~20 qty – CO2/Nitrogen regulators
2 qty – 275 gallon IBC totes used for cold liquor with automatic water makeup.
1 qty – True lowboy reefer.
1 qty – Commercial deep sink with drain board, faucet and prerinse spray head.
~20 qty – Additional triclover clamps.
~20 qty – Additional triclover silicone gaskets.
~100’ – 1” and 1 ˝” brewers hose with removable 1 ˝” stainless triclover hose barbs.
1 qty – 8 head chrome, glycol cooled draft tower.
1 qty – ˝ hp glycol power pack for cooling a long draw draft system and above draft tower.
This is absolutely everything you will need to get yourself out of the gates brewing quickly. You will need to supply natural gas, water, 120/208V, 3 phase power and floor drains.
As an added bonus, buyer is welcome to come out for a week of training in this brewhouse if an agreement is reached prior to decommissioning. Topics will include recipe development, a typical brewday, transferring from fermenters to brites under an anerobic environment, kegging, cleaning, etc…
Please feel free to call or email with questions. My name is Greg, phone is 505-400-4892 or email at email@example.com.
Last edited by BreakerBacker; 01-03-2017 at 06:07 PM.
Reason: Price drop