Results 1 to 12 of 12

Thread: Perlick 4420 Dual Pump 1 1/2 HP Glycol Chiller FS

  1. #1
    Join Date
    Jun 2016
    Location
    Rutherfordton, NC
    Posts
    11

    Perlick 4420 Dual Pump 1 1/2 HP Glycol Chiller FS

    Perlick 4420 1.5 hp glycol chiller. Chiller has an additional pump for a second run.
    Recently serviced and ready for its new owner.
    $2900 or best offer. Available for local pick up or can pallet it up and ship.
    Located in North Carolina. Message me with any questions or shipping quotes.



    Name:  0416171205a_LI.jpg
Views: 910
Size:  90.3 KB

    Name:  0416171205 (2).jpg
Views: 896
Size:  89.7 KB
    Last edited by workinglongtime; 04-24-2017 at 11:53 AM.

  2. #2
    Join Date
    Jun 2016
    Location
    Rutherfordton, NC
    Posts
    11
    Bump to the top.

  3. #3
    Join Date
    Jun 2016
    Location
    Rutherfordton, NC
    Posts
    11
    Bump To The Top.

  4. #4
    Join Date
    Jun 2017
    Location
    Hendersonville, Nc
    Posts
    9

    glycol chiller

    Quote Originally Posted by workinglongtime View Post
    Bump To The Top.
    Would you happen to know what size and how many fermenters this unit could handle? I'm needing one that can handle one 10bbl and four 7bbl.

    Cheers, Mike

  5. #5
    Join Date
    Jun 2017
    Location
    Hendersonville, Nc
    Posts
    9
    I just realized this is for a long draw system. Silly me....

  6. #6
    Join Date
    Jun 2016
    Location
    Rutherfordton, NC
    Posts
    11
    This chiller will work for tank crashing/fermenting. Msg sent.

  7. #7
    Join Date
    Jun 2017
    Location
    Hendersonville, Nc
    Posts
    9
    Thanks for the reply. I sent you a message as well.

  8. #8
    Join Date
    Jun 2016
    Location
    Rutherfordton, NC
    Posts
    11
    bump..........

  9. #9
    Join Date
    May 2014
    Location
    Benicia, CA.
    Posts
    35

    These Perlicks work great for 3 & 10 bbl fermenters!!!

    We use a 4410 1/2hp for chilling our 3 x 3bbl jacketed fermenters. We are using the first in last out standard. Ball valves at the bottom of each cone for isolation. One solenoid for each ferm from Dudadiesel, pressure regulator and all monitored by a bcs-460. These Perlicks rock!!!




    Quote Originally Posted by baer19d View Post
    I just realized this is for a long draw system. Silly me....

  10. #10
    Join Date
    Jun 2016
    Location
    Rutherfordton, NC
    Posts
    11
    agreed brewmason. with this unit being a 1.5hp chiller, it should be good for 28 bbls depending on your btu needs (7bblx4 etc).

  11. #11
    Join Date
    Aug 2017
    Location
    Palm Coast, Florida
    Posts
    1

    Interested

    Please contact me I tried to PM you but you inbox is full nine 0 four six 8 7 three 2 nine 9

  12. #12
    Join Date
    Jun 2016
    Location
    Rutherfordton, NC
    Posts
    11
    cleaned up my inbox. sorry about that. message incoming.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •