Hach DO Meter - Zwickle Adapter Gasket Source

[SecondLineBrew]

So the gaskets on the Zwickle Adapter for our recently purchased Hach DO meter aren't very durable. The meter came with one spare (yeah, don't get me started). They are also a non-standard size which means the gaskets for our Zahm aren't interchangeable with this unit. Anyone found a ready and inexpensive source for these gaskets?

In hindsight, I should have probably bought a spare Zwickle adapter from Zahm to use for my DO meter.

Many thanks,

Mark

[AT-JeffT]

I used a faucet seal backwards in our zahm adapter. Works better than the original. Maybe it might work in your case too.

[SecondLineBrew]

Good call on washer

I used a faucet seal backwards in our zahm adapter. Works better than the original. Maybe it might work in your case too.

Jeff,

Went down to Ace Hardware and picked up a couple 1/4 flat washers (Danco Inc. Stk No. 35064B) and they work great; more robust and less expensive.

Many thanks for the suggestion.

Mark

[AT-JeffT]

Jeff,

Went down to Ace Hardware and picked up a couple 1/4 flat washers (Danco Inc. Stk No. 35064B) and they work great; more robust and less expensive.

Many thanks for the suggestion.

Mark

Perfect. Glad you got it fixed.

'Jeff