I have a bunch of those household chest freezers that were left in a building that i bought, and i was thinking of turning them into chilling units for fermenters. I have 7 bbl plastic conicals that i was going to install 50' copper 1/2" tubing inside of and connect those to a glycol reservoir that would be the inside of the freezer, and either pipe out to this pump.....
OR.... I was going to get a submersible pump and run piping out. As i understand the above mentioned pump should be self-priming so i should be able to keep it outside the freezers and they are fairly cheap. I would hate to go and spend a lot of money on a glycol system, or need a larger cold room, when i have a, damn near, free solution when compared available. Thoughts? Ideas?
OR.... I was going to get a submersible pump and run piping out. As i understand the above mentioned pump should be self-priming so i should be able to keep it outside the freezers and they are fairly cheap. I would hate to go and spend a lot of money on a glycol system, or need a larger cold room, when i have a, damn near, free solution when compared available. Thoughts? Ideas?
Comment