Results 1 to 5 of 5

Thread: tri clamp adapters for dairy tank modifications

  1. #1
    Join Date
    Oct 2016
    Location
    Johnstown, PA
    Posts
    21

    tri clamp adapters for dairy tank modifications

    Hello all,

    I have purchased a 300 gallon square dairy tank and a 350 gallon round dairy tank to use as a mash tun and boil kettle. I have tried to order all sorts of fittings to connect to these outputs and nothing seems to work. I've tried a 1 1/2" sanitary female npt to 1 1/2" tri clamp, 2", 2 1/2" and nothing seems to connect. Are the dairy tanks a different pipe thread and does anyone know where i can purchase adapters for dairy tanks to tri clamp?

  2. #2
    Join Date
    May 2012
    Location
    Livermore, CA
    Posts
    420
    Probably should get a thread gauge to see if they are even NPT threads. Pictures might also help anyone here make a determination.

  3. #3
    Join Date
    Mar 2011
    Posts
    107

    Bevel seat fitting

    Dairy processing tanks sometimes have bevel seat fittings/threads. Google "bevel seat fitting" to see if it looks the same as your dairy tank.
    Last edited by Catfish002; 07-14-2017 at 05:21 PM.

  4. #4
    Join Date
    Aug 2010
    Location
    Enterprise, Oregon
    Posts
    1,519
    Can you have the fittings cut off and replaced by TC fittings welded on? This is what we've done with some odd-ball fittings.
    Timm Turrentine

    Brewerywright,
    Terminal Gravity Brewing,
    Enterprise. Oregon.

  5. #5
    Join Date
    Jul 2012
    Location
    Burnaby BC Canada
    Posts
    280

    Could you post some photos?

    If you can post some photos it would certainly help us identify them.
    Your CPE Systems Team!
    CPE Systems Inc.
    800-668-2268
    CPEsystems.com
    Thinkpumps.com
    sales@cpesystems.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •