Announcement

Collapse
No announcement yet.

tri clamp adapters for dairy tank modifications

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • tri clamp adapters for dairy tank modifications

    Hello all,

    I have purchased a 300 gallon square dairy tank and a 350 gallon round dairy tank to use as a mash tun and boil kettle. I have tried to order all sorts of fittings to connect to these outputs and nothing seems to work. I've tried a 1 1/2" sanitary female npt to 1 1/2" tri clamp, 2", 2 1/2" and nothing seems to connect. Are the dairy tanks a different pipe thread and does anyone know where i can purchase adapters for dairy tanks to tri clamp?

  • #2
    Probably should get a thread gauge to see if they are even NPT threads. Pictures might also help anyone here make a determination.

    Comment


    • #3
      Bevel seat fitting

      Dairy processing tanks sometimes have bevel seat fittings/threads. Google "bevel seat fitting" to see if it looks the same as your dairy tank.
      Last edited by Catfish002; 07-14-2017, 06:21 PM.

      Comment


      • #4
        Can you have the fittings cut off and replaced by TC fittings welded on? This is what we've done with some odd-ball fittings.
        Timm Turrentine

        Brewerywright,
        Terminal Gravity Brewing,
        Enterprise. Oregon.

        Comment


        • #5
          Could you post some photos?

          If you can post some photos it would certainly help us identify them.
          Your CPE Systems Team!
          CPE Systems Inc.
          800-668-2268
          CPEsystems.com
          Thinkpumps.com
          sales@cpesystems.com

          Comment

          Working...
          X