Announcement

Collapse
No announcement yet.

Chiller Installation Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chiller Installation Help

    I just bought a Kreyer Chilly 45, and am trying to design my loop installation. I have 3 5bbl FV and 1 5bbl Brite, which will be in an air conditioned room. I'm trying to figure out my supply header and return sizing, and could use some help. The chiller's inlet/outlet are 3/4" and the inlet/outlet on the tanks are 1". The tanks are all single zone jackets. Any help would be greatly appreciated, thanks.

  • #2
    Did you get help offline? I have similar questions.

    Originally posted by Jlange311 View Post
    I just bought a Kreyer Chilly 45, and am trying to design my loop installation. I have 3 5bbl FV and 1 5bbl Brite, which will be in an air conditioned room. I'm trying to figure out my supply header and return sizing, and could use some help. The chiller's inlet/outlet are 3/4" and the inlet/outlet on the tanks are 1". The tanks are all single zone jackets. Any help would be greatly appreciated, thanks.
    Did you get help offline? I have similar questions about sizing of the system using a ground loop for a heat sink.

    Comment

    Working...
    X