Announcement

Collapse
No announcement yet.

What hose size and pump is ideal going into cip arm and through ball?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Great, what size hose are you using with this push through the cip arm and ball?

    Comment


    • #17
      The cip hose is a 1/2" braided vinyl hose, and the supply side is 1" vinyl I believe. I found some pvc fittings that fit, and put a valve on the outlet. I can take some pics tomorrow.

      Comment


      • #18
        Would be much appreciated , thanks

        Comment


        • #19
          Ever get a chance to get those pics?

          Comment


          • #20
            Sorry man, its been a rough couple weeks with the now ex and GABF. Heres a pic of the pump set up to cip fermentersClick image for larger version

Name:	20171010_101308.jpg
Views:	1
Size:	100.3 KB
ID:	191499 the red hose goes to co2 for washing kegs but I plug it up for fermenters/kettles

            Comment


            • #21
              Great thanks! Are the hose sizes as you thought? 1/2 inch to ferm cip and 1 inch inlet? Thanks

              Comment


              • #22
                Yep! The threaded inlet and outlet are 3/4" but I shoved the 1 inch house over the 3/4" pipe, and reduce the outlet to fit the 1/2" braided hose

                Comment


                • #23
                  So what what are the hose sizes? 1/2 and 1?

                  Comment

                  Working...
                  X