I'm planning on brewing an IPA soon but can't decide on the size of the dry hop. I'd like a BIG aroma, something that really grabs your attention. What size dry hop should I use? BTW I plan on using a mix of Columbus and Centennial.
Announcement
Collapse
No announcement yet.
Size of dry hop????
Collapse
X
-
I do an IPA w/ the same hops plus cascade. 1pnd per bbl dryhopped in fermenter will give a huge aroma. 1pnd/2bbls will give great aroma so you might want to start there. Also when picking a dry-hop total oil content, not IBU, is most important.
Add hops after primary fermentation and hold for 3-5 days warm before crashing. Remember not to re-pitch this yeast, or harvest before adding dry hops. Additionally, I add whole cone to the server in a nylon bag. Because it takes 4-5 weeks to sell, the best pint is the last pint!!Brewmaster, Minocqua Brewing Company
tbriggs@minocquabrewingcompany.com
"Your results may vary"
Comment
-
Ted's suggestion is good for an American IPA on proportions. For something less colonial I'd go with about half that. Last year I dry-hopped an IPA with a mix of Chinook and Northern Brewer at about .33 lbs/bbl, OG was a little higher at 1.077 if my memory is correct, still held a great malty profile and had a mildly pleasant piney aroma from the chinook. It was a refreshing escape from the usual cascade.
Are you kegging or using a serving tank? Columbus/centenial are some potent hops, imo, so I'd go on the lighter end of the spectrum. If you're adding to the serving tank, you can always try it for a few days then add more if it doesn't meet your expectations.www.devilcraft.jp
www.japanbeertimes.com
Comment
-
Originally posted by frigatebayBottle and kegging. Talked to a couple of local guys and I'm getting .5-2lb/bbl.Joel Halbleib
Partner / Zymurgist
Hive and Barrel Meadery
6302 Old La Grange Rd
Crestwood, KY
www.hiveandbarrel.com
Comment
-
I like dryhopping in ageing. Yes, I know it is "supposed" to be done when warmer, but I still have great results. Yeast in suspension really diminishes the effect, so in ageing, that problem is gone. Compared to fermenters, you can even get longer contact time depending on your ageing program. Two week minimum, best at three, four or more. For outrageous flavor, use a minibale (11 to 13 lbs) per 7 barrel grundy, subtle flavor a quarter of that.
Comment
-
Anyone ever tried "burping" your tanks while in the dry hop stage?
I've done it a few times and it seems to help the aroma. If you have the time, after letting the hops sedttle in the fermenter for a few days, blow off top pressure and send a shot of co2 into the bottom of the cone. Do this a couple times and it will send your hops back into suspension in the aging beer. Slowly add top pressure again and continue to age. This should obviously be done after yeast has been harvested.Tim Butler
Empire Brewing Co.
Syracuse, NY
Comment
-
Originally posted by frigatebayI'm planning on brewing an IPA soon but can't decide on the size of the dry hop. I'd like a BIG aroma, something that really grabs your attention. What size dry hop should I use? BTW I plan on using a mix of Columbus and Centennial.
-Christian, Ølfabrikken
Comment
Comment