I have a wall panel with Love TS2 controllers for my tank jackets, and some standalone Johnson A421 ABG-02 controllers. Every time during fermentation, they will kick on at 1F above my setpoint like usual, but will not stop cooling until the fermentor is about 3-4 degrees cooler.
For example, if my setpoint is at 68F on the controller and the temp reaches 69F, the controller will start cooling and continue to do so until the tank is at 66F.
Trying to stop this system from stalling fermentations, if anyone knows any workarounds. I've tries all sorts of different settings in the advanced settings, and both the company they were bought from and the manufacturer have been no help.
For example, if my setpoint is at 68F on the controller and the temp reaches 69F, the controller will start cooling and continue to do so until the tank is at 66F.
Trying to stop this system from stalling fermentations, if anyone knows any workarounds. I've tries all sorts of different settings in the advanced settings, and both the company they were bought from and the manufacturer have been no help.
Comment