Announcement

Collapse
No announcement yet.

Thermometer on 1-1/2" TC fitting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thermometer on 1-1/2" TC fitting

    I've got a thermometer with about 3" of stainless probe on a 1-1/2" TC fitting for my cool-in/aeration setup that is busted. I'm looking for any type of thermometer out there that has a 1-1/2" TC fitting. Can't seem to find anything like it from JV, GW Kent or any of the other usual looking places. Anyone know of a source?

  • #2
    Call specific mechanical. They manufacture brewing equipment and can produce one of these for you. Go to their website at www.specific.net to get their info.

    Comment


    • #3
      Have an 1.5 inch triclover cap drilled and tapped for half inch threads. It will be around $20 or less. Then you can use any theremometer with half inch threads. Key Industrial in Napa could do this @ 707 252-0312 x204 for Chris. Tell her to give you a good price.

      Comment


      • #4
        GW Kent (and many other fittings suppliers) sell(s) female threaded 1.5 " TC caps in a variety of sizes 1/2", 3/8", 3/4", etc. You can easily find a sanitary thermometer with a male NPT to fit one of those.

        Comment


        • #5
          Thanks guys

          Thank you all...all excellent solutions. I'm getting on it!

          Comment

          Working...
          X