Results 1 to 4 of 4

Thread: 2.5" tank light?

  1. #1
    Join Date
    Oct 2012
    Posts
    56

    2.5" tank light?

    We have a Pub brewing system and are looking for a kettle light. The TC seems to be 2.5"...we might use a reducer and then 3" tank light which seems to be the typical size. Any sites that offer 2.5" TC? Thanks

  2. #2
    Join Date
    Jan 2003
    Location
    Palau
    Posts
    1,923

    Go LED.

    If you have a typical clear lens on the kettle penetration, then you can use any of a number of standard LED lights meant for recessed accent lighting. I like the fact that they don't get so flippin hot that they brand you. Low energy, low voltage, high lumens, and cheap. If you don't have a clear lens on your lamp assembly, then clear acrylic works well to make one. Good luck!
    Phillip Kelm--Palau Brewing Company Manager--

  3. #3
    Join Date
    Oct 2012
    Posts
    56
    Thank you..I'm looking for the assembly.

  4. #4
    Join Date
    Nov 2015
    Location
    Tulsa, OK
    Posts
    14
    Check out Archon Industries--they make process observation lights and have what you are looking for.

    The tri-clamp model light in halogen or LED is the KA100CL seen here: http://www.archonind.com/ObsEquip/Li...100CL_Desc.asp

    Their sales guy, Matt, was super helpful when we were trying to pick which unit was right for us.

    Good luck!
    Todd Phillips
    Director of Operations
    Dead Armadillo Craft Brewing
    1004 E 4th Street
    Tulsa, OK 74120

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •