Tweet
I previously posted asking for help sinding seals for our Handtmann pressure regulating valves, and I finally found what I needed!
Jeff McBrady at O-Rings West www.oringswest.com has been more than helpful and sent me a sampler of o-rings, from which I was able to find a fit.
In case anyone else needs to replace the o-rings on a Handtmann prv, the rings are: N70-M4X28 and N70-M3X11.5.
Many thanks to y'all for the help, and shouts to Jeff--if you need rings, give him a call!
Timm.
Jeff McBrady at O-Rings West www.oringswest.com has been more than helpful and sent me a sampler of o-rings, from which I was able to find a fit.
In case anyone else needs to replace the o-rings on a Handtmann prv, the rings are: N70-M4X28 and N70-M3X11.5.
Many thanks to y'all for the help, and shouts to Jeff--if you need rings, give him a call!
Timm.