Tweet
I have a 5 micron filter in my steam line for my Till keg cleaner. Today after installing a freshly cleaned filter the filter clogged with rust and would not allow steam to pass. Can you folks tell me: How do you filter for sterile steam?
-
-
Pure steam generator
The best way to ensure that you don't get any off flavors in your beer is to use a Pure Steam Generator ( Pual-Mueller has built these in the past). These units are extremely expensive, and I have only worked with one at the Van Nuys AB plant. This is if the steam is being used for sanitation.
I would talk to a good mechanical contractor you might be able to put a y-trap and some stainless piping before your filter to minimize this?
Graydon
Comment