Simple Manual Keg Washing Methods

[omearabros]

Does anyone have a good example of a simple manual keg washing process using your existing CIP system?

For example - a couple of filler/washer heads hooked up to a CIP cart so you could walk up with a Keg, clamp on the head, flip a valve or two and flush with the appropriate solutions and rinse, and move on. Looking for something to wash a few kegs with now and then without buying a keg washing unit or engineering anything too complex.

Also, do you typically fill a keg full of solution, or just pressurize and "spray it in" for some a given duration? We're new to manual keg washing, as you can tell.

Thanks!
Tim

[wailingguitar]

Here is a thread on that very topic. You should have all or most of what is needed already...

http://discussions.probrewer.com/showthread.php?16170-Home-Grown-keg-washer-set-up&highlight=homemade+keg+washer

[omearabros]

Here is a thread on that very topic. You should have all or most of what is needed already...

http://discussions.probrewer.com/sho...ade+keg+washer

Thanks wailingguitar! This is very much like what I had in my head, and we just saw this thread the other day to back it up. Thanks for your help!

Tim