Adjustable Pressure Relief Valve (0 to 10psi) w/ Triclamp Fitting?

[Tubbybrew]

Has anyone seen an adjustable pressure relief valve that comes w/ a triclamp fitting? I'm looking for something that can be adjusted in the range of 0-10psi (or lower) but the only ones I can find start at 15psi and go up.

Thanks,
- Chris

[brewmaster 2011]

gw kent has adjustable 1-1/2" triclamp prv's.

[Tubbybrew]

I saw those... but there is some conflicting information on the descriptions on whether it goes below 1 bar or not. I sent them an email and asked for clarification but haven't heard back yet. I really need something that works in the 0-10psi range.

[brewmaster 2011]

Your best bet is to call them. I tried to email them with no response.

[schmogger]

What are you planning on using it for?

[Tubbybrew]

our bottling tank which is a wine tank meant to take very little pressure (if any). I just don't trust the plastic one that came along w/ it in terms of durability and being able to keep it sanitary.

[panadero]

There is a thread here that talks about a homebuilt bottler using counter pressure fillers from morebeer that have adjustable pressure relief valves. They aren't on triclamps, but you can find triclamp/npt adapters at a number of places, including kent and brewers hardware. This may work for you.