We use a Banner Perfecta-pour Model 60835 1/3 hp. air-cooled power pack to chill our 8-line beer trunk and tower in our outdoor serving kiosk. The circulation pump uses a plastic coupling between the pump and motor, which is supposedly a thermal break, but which lasts less than 6 months of continuous running. This is a PITA.
We'd like to replace it with something reliable, like our brewery glycol cooling pump which has run continuously for about 8 years without a problem (obviously, this 7 1/2 hp pump would be a little oversized!).
The particulars of our system: 95' of 8-line insulated beer trunk (mostly in a hot attic), 3/8" lines. The tower in the kiosk is an 8-tap Micromatic cooled--not ice--tower. The reserve tank on the chiller is 7 gal. with a plate-type evaporator. The glycol is chilled to 32 F; return temp is usually around 35 F.
I'm sure I'm forgetting something here, but I'm sure someone will let me know what--
We'd like to replace it with something reliable, like our brewery glycol cooling pump which has run continuously for about 8 years without a problem (obviously, this 7 1/2 hp pump would be a little oversized!).
The particulars of our system: 95' of 8-line insulated beer trunk (mostly in a hot attic), 3/8" lines. The tower in the kiosk is an 8-tap Micromatic cooled--not ice--tower. The reserve tank on the chiller is 7 gal. with a plate-type evaporator. The glycol is chilled to 32 F; return temp is usually around 35 F.
I'm sure I'm forgetting something here, but I'm sure someone will let me know what--
Comment