My pump just died out on me during a brew recently. I bought a new pump(Goulds) and got it mounted to our existing cart, and wired up accrording to the diagram sticker on the side. I flip the switch and... nothing. Filled up kettle, hooked up hoses, primed, flipped it on and.... nothing. Pulled the wires and reversed them, tried again... nothing. Am I missing something? I tried reading the manual, it was very unhelpful.
The pump is connected to a simple light switch, which is run into some spare outlets that are mounted to the cart that my old pump was on. I went back through and opened everything up to check the wiring and everything seems to be square. Any help would be appreciated.
The pump is connected to a simple light switch, which is run into some spare outlets that are mounted to the cart that my old pump was on. I went back through and opened everything up to check the wiring and everything seems to be square. Any help would be appreciated.
Comment