Announcement

Collapse
No announcement yet.

Lenticular Modules by GWKent in a Pall housing?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lenticular Modules by GWKent in a Pall housing?

    Ordering replacement modules from Pall is sometimes a bear. Does anyone know if it's totally copacetic to use GW Kent's lenticular modules in a Pall housing?

    Shop industry-best quality industrial brewing and wine making equipment available through GW Kent. Fast shipping!
    Nat West
    _____________________
    nat@reverendnatshardcider.com
    503-567-2221

  • #2
    GW Kent SDII Modules

    Originally posted by revnatscider View Post
    Ordering replacement modules from Pall is sometimes a bear. Does anyone know if it's totally copacetic to use GW Kent's lenticular modules in a Pall housing?

    http://www.gwkent.com/lenticular-filter-dedia.html
    Hello Nat,
    First off, I apologize for any issues you are having ordering directly from Pall Corporation. We strive to provide great customer service, however we do sometimes fall short of expectations.

    That being said, the SUPRAdisc II modules that GW Kent currently sells (as of December 2014) are the same ones you would get directly from Pall, so YES, they should fit in your housing with no issues. I have not heard of any other manufacturer making an lenticular module with a support cage currently, although there are a number of lenticular module manufacturers WITHOUT a polypro support cage - these are typically used in applications where backflushing is not required, as those modules cannot withstand pressure in the reverse direction.

    Thanks!

    Comment

    Working...
    X