Announcement

Collapse
No announcement yet.

Keg filling question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Keg filling question

    Looked around the forum a little, and had a question about keg filling.
    I am considering filling kegs in series. I know that if you have multiple heads, it is quicker just to run them from a manifold. I'm not so concerned about saving time but doing complete fills with less spillage. My thought process is if I run the kegs all in series, I'm thinking 7, it will obviously take 7x as long to fill the tanks, but that gives me a longer period to clean etc without having to check on the fill and switching over all the time. Also, my thoughts are that the kegs will fill more completely, and I will be potentially wasting less as it will foam only out of the last keg, rather than foaming out of 7 kegs run off a manifold.
    Anyone fill this way or try it?


    Sent from my iPhone using Tapatalk
Working...
X