We are looking at buying a dedicated CIP pump for our brewery. And are a little confused on sizing. The pump will be used for cleaning 20bbl tanks and 5bbl tanks.
We have been looking at a 2hp pump with a stainless steal head that is designed for 70m of lift giving 60psi.
IS this way too strong for a CIP pump? I know our tanks are rated to 1bar or about 15psi, is that an issue?
Any advice would be apreciated.
We have been looking at a 2hp pump with a stainless steal head that is designed for 70m of lift giving 60psi.
IS this way too strong for a CIP pump? I know our tanks are rated to 1bar or about 15psi, is that an issue?
Any advice would be apreciated.
Comment