GW Kent and ABE CIP Gasket Size

[sopbeer]

It seems that GW Kent and ABE have custom sizes for their CIP TC gaskets on their CCTs and BBTS. Does anyone have a size and a source other than the manufacture? 3 inch is too small and 4 inch too big. 3.5 inch I haven't tried but measuring it looks like they are in between 3.5 on both sides. I don't want to purchase a lot of 3.5 inch to find out they don't work. We don't have a lot of 3.5 inch fitting in the brewery.

The GW Kent CCT is a 7 bbl
ABE CCT and BBT is 30 bbl

Thanks for any help

[CPESystems]

Sounds like a 3" sched 5 tri-clamp - we have them

Sounds like a 3" sched 5 tri-clamp - we have them

[gasketman]

Sample

Give us a call and we will send you one to try. If it doesn't fit you can send it back. 877-456-5230

Dwight
Brewery Gaskets

It seems that GW Kent and ABE have custom sizes for their CIP TC gaskets on their CCTs and BBTS. Does anyone have a size and a source other than the manufacture? 3 inch is too small and 4 inch too big. 3.5 inch I haven't tried but measuring it looks like they are in between 3.5 on both sides. I don't want to purchase a lot of 3.5 inch to find out they don't work. We don't have a lot of 3.5 inch fitting in the brewery.

The GW Kent CCT is a 7 bbl
ABE CCT and BBT is 30 bbl

Thanks for any help