Hose recommendation for filling tanks

[nvr2low]

I am looking for a new hose that will be used to fill my tanks both for brewing and for cleaning. I have an on demand water heater that runs up to 185 degrees for filling my strike water, I also use it for sparging. There are a bunch of hoses out there for transferring but I am looking for something in the 1/2" range that is food grade, flexible and can handle 185 degrees or more. I have been using high temp silicone but it ends up bursting after only a couple months use.

[andrew_FSBC]

Braided silicone. Not cheap, but if you need 1/2" capable of 185° under pressure I'm pretty sure it's your only choice.