I'm trying to find a replacement valve seat on a 3" pneumatic butterfly valve. GW Kent and Brewery Gaskets don't carry a valve seat with the same dimensions as my current one. Does anybody have any referrals for this kind of thing? As far as I can see there is no info to determine the manufacturer.
Announcement
Collapse
No announcement yet.
3" Butterfly Valve Seat
Collapse
X
-
Butterfly valve seat
Send us a picture of the seat and the valve. We might be able to identify it for you.Your CPE Systems Team!
CPE Systems Inc.
800-668-2268
CPEsystems.com
Thinkpumps.com
sales@cpesystems.com
-
Originally posted by dick murton View PostI'm intrigued. What on earth are you using a 3 inch valve for? 3 inch pipework takes a flow of >225 hl / hr to clean it.
In any event, the gasket is likely the same as for a manual 3”. Usually the pneumatics are just fitted to a standard valve body. If your system came as one, your valves are probably all from the same company. If not, you may have a harder time finding the proper sized seat.
+1 for asking brewery gaskets or CPE. I’m sure one of the two can source or make you one with the proper dimensions out of the material needed.
Comment
-
Originally posted by dick murton View PostI'm intrigued. What on earth are you using a 3 inch valve for? 3 inch pipework takes a flow of >225 hl / hr to clean it.
I ordered the closest valve seat that brewery gaskets had to my measured dimensions, hopefully it'll work. I'll also try CPE.
Thanks guys. Ill update just for closure once all is said and done. Any other suggestions are also welcome.
Comment
Comment