No announcement yet.

Oxygenation assembly

  • Filter
  • Time
  • Show
Clear All
new posts

  • Oxygenation assembly

    I need to buy a 1.5" tri-clamp oxygenation injection system for putting air into wort. I can't seem to source it. Who has a source for a good one?

  • #2
    Heavy duty construction in 304L stainless steel.  The two ends are 1.5” TC and a sight glass is built-in for visual inspection of the product flow.  Inside of the main body is a 316” sintered stainless steel “stone” with pores of 0.2 microns to create very fine bubbles.  The stone is 4” long and 1.5” outer diameter.  The gas inlet is a ¼” NPT ball valve with a quick disconnect. Commonly used on the outlet of the heat exchanger on the way to the fermenter to aerate the wort.  Also used for carbonating between the fermenter and the brite tank.  Best results are attained the longer the distance is between the carb system and the brite tank.


    • #3
      chiller 1.5" Tri-clamp T Carb stone sight glass 1.5" Tri-clamp T Thermometer transfer hoseClick image for larger version

Name:	o2.jpg
Views:	1
Size:	74.8 KB
ID:	190482


      • #4
        Oxygenation assembly

        Stout Tanks-They have a SPOX setup very similar that is pretty reasonable at just under $200.
        Last edited by jcmcdowell; 08-27-2014, 07:34 PM.
        JC McDowell
        Bandit Brewing Co.- 3bbl brewery and growing
        Darby, MT- population 700
        OPENED Black Friday 2014!


        • #5
          Originally posted by Beluedog View Post
          chiller 1.5" Tri-clamp T Carb stone sight glass 1.5" Tri-clamp T Thermometer transfer hose[ATTACH]18538[/ATTACH]
          this ^^, we do the same exact thing, it works great. Add a flowmeter if you are going to use O2 instead of air to achieve a PPM greater than 8, there are ways to calculate flow rate to achieve desired PPM especially if you can borrow a DO2 meter for a day to play with.