No announcement yet.

3/4" swing kettle filler

  • Filter
  • Time
  • Show
Clear All
new posts

  • 3/4" swing kettle filler

    I'm trying to come up with a way to fill two of my kettles from the top. They are next to each other and would like to use a some sort of swing arm (pot filler type thing) to fill one or the other. The problem is I would like to retain my 3/4 inch pipe size to get as much gallon per minute as possible. The big commercial 3/4 pot fillers I found are super expensive and also seem to choke back the GPM's.

    Has anyone built something like this?

    We mocked something up using a sharkbite "T", we are able to rotate it after it is tightened, but pretty sure this will begin to leak at some point.