Onebadsc
Registered User
Last Activity: Today, 10:45 AM
Joined: 11-13-2013
Location: Chicago IL
-
3/4" swing kettle filler
I'm trying to come up with a way to fill two of my kettles from the top. They are next to each other and would like to use a some sort of swing arm (pot filler type thing) to fill one or the other. The problem is I would like to retain my 3/4 inch pipe size to get as much gallon per minute as possible.... -
This is the one I was thinking of getting, they make it in brass and stainless, and while reading the spec for the brass I see this: "WarningLead content ~ 3.05%. It cannot be applied to drinking water."
The stainless isnt that much more, but I do worry about the pain of connecting... -
Lead free motorized water valve
With my old setup, I used a motorized water valve to fill my HLT, but now my new setup does not use an HLT, so I will be filling my Mash tun directly with hot water, and worried about lead leaching in because of the higher temperatures. The only 3/4 inch lead free brass valves I see are very expensive....
No activity results to display
Leave a comment: