Search:

Type: Posts; User: TiminOz

Page 1 of 9 1 2 3 4

Search: Search took 0.02 seconds; generated 15 minute(s) ago.

  1. Replies
    1
    Views
    164

    Kegs are serially produced, meaning they are made...

    Kegs are serially produced, meaning they are made in an automated controlled manufacturing facility and not built one at a time by individual workers. Check out Thielman Portinox in Granada for...
  2. I think you have blown this out of proportion....

    I think you have blown this out of proportion. There is no way for you to know how the service dog comforts the person. And the breed makes zero difference. As long as the dog stays by the persons...
  3. I would consider plumbing the on demand water...

    I would consider plumbing the on demand water supply to your current HLT using a Warrick sensor for auto refill. I assume your HLT is plumbed to meet your CLT supply at a blending valve with a temp...
  4. Replies
    6
    Views
    1,269

    If you are using a jacketed BBT then you need to...

    If you are using a jacketed BBT then you need to run the beer through an insulated python into you cold room to a beer pump with a FOB and coupler hook up. This will allow a quality pour and be set...
  5. Replies
    8
    Views
    561

    The helix in a flex auger is not stainless steel,...

    The helix in a flex auger is not stainless steel, just steel. Anything used in the poultry industry in India should work fine. The key is to run a bag of un-milled grain through several times to...
  6. Replies
    8
    Views
    561

    You should be able to fit the Choretime 75 auger...

    You should be able to fit the Choretime 75 auger in that 3 feet of space with a very short flex tube to the hydrator. The key will to remove the tube once you mashed to prevent steam gumming the...
  7. Replies
    10
    Views
    685

    I would also guess that you have a bit grit...

    I would also guess that you have a bit grit trapped under the diaphragm or that it has worn out. If you rinse it in a stainless bowl or sink you should see the particle that is allowing the glycol to...
  8. Nick, I'll send you an email with a older...

    Nick,

    I'll send you an email with a older operations manual and a trouble shooting guide. There should be a data decal on the back with a serial number and build date which would be handy.
    ...
  9. You would definitely be an option for this type...

    You would definitely be an option for this type of setup. But the initial question was could he do it for under $20K. The 3.5 BBL is $17K just for the BH before any cellar tanks, ancillary equipment...
  10. I may have been a bit high on the chiller, a...

    I may have been a bit high on the chiller, a Prochiller for a 3BBL is listed at $9,950 (without plumbing) and buying a used chiller is just an invitation to pay for repairs during your first year,...
  11. I'm sure you could put together a...

    I'm sure you could put together a Frankenbrew,Homebrew set up with very limited refrigeration for under $25K, but lets just list a couple of items that are needed in a real commercial brewery. ...
  12. I would suggest 3BBL at a minimum to ensure that...

    I would suggest 3BBL at a minimum to ensure that it is sustainable. Direct fire with mains gas or bulk LPG would be best, but you could go electric. I would look at putting in a small trench drain....
  13. Replies
    2
    Views
    425

    This should be a pretty easy move. Use a magic...

    This should be a pretty easy move. Use a magic marker to number and identify each pipe you remove. Example: Kettle 1 to Kettle 2, K-2 -K3, K-3 to BV (butterfly valve), BV to K-4.

    Number the whole...
  14. Replies
    6
    Views
    658

    You can't go wrong with Premier Stainless Systems...

    You can't go wrong with Premier Stainless Systems keg washers. They have a very inexpensive manual system and a very reasonable semi-auto system. You may pay more up front but what you save in labour...
  15. Replies
    5
    Views
    497

    Google Fuji temp controllers. There will be...

    Google Fuji temp controllers. There will be version that works in the PXR4 series controllers.
  16. Replies
    5
    Views
    720

    I would rent a chiller until the install can be...

    I would rent a chiller until the install can be done. A quick google of chiller rentals in your area presented plenty to choose from....
  17. Replies
    3
    Views
    1,570

    Check out the Micro matic link...

    Check out the Micro matic link https://www.micromatic.com/keg-beer-tools-and-accessories/keg-jackets , you can also search under keg koozie or insulated keg jacket, there are a bunch of sellers out...
  18. Replies
    4
    Views
    6,475

    They use PET bottles in New Zealand and have been...

    They use PET bottles in New Zealand and have been doing so for years. Garage Projects fills them with some very tasty ales. They call them riggers.
  19. Thread: Growlers

    by TiminOz
    Replies
    1
    Views
    723

    EGrandstand https://www.egrandstand.com/

    EGrandstand https://www.egrandstand.com/
  20. Please send me your email contact to...

    Please send me your email contact to tim@premierstainless.com. I'll send you a manual and a trouble shooting document that should get you up and running. Also specify the model and approximate age....
  21. Replies
    3
    Views
    476

    This manual I googled might help you out....

    This manual I googled might help you out.
    http://flowmeternara.com/tt/board/db/board/data/upload/1_10000/15/LWGY_Manual_(New).pdf
  22. Thread: Customs Broker

    by TiminOz
    Replies
    2
    Views
    431

    Whichever freight forwarder you use to ship the...

    Whichever freight forwarder you use to ship the equipment should take care of your customs process. The manufacturer is responsible for supplying all the documents required for customs to the freight...
  23. Replies
    10
    Views
    1,778

    60644 I think this worked.

    60644

    I think this worked.
  24. Replies
    10
    Views
    1,778

    You could look at double stack unitanks with a...

    You could look at double stack unitanks with a standard 60 degree cone. They use these a lot of places to make up for a shortage of floor space. White Labs uses this setup.
  25. There is a version of the Fuji PXR3 with the...

    There is a version of the Fuji PXR3 with the RS485 feature that allows you to change the temp on tanks remotely.
Results 1 to 25 of 202
Page 1 of 9 1 2 3 4