Search:

Type: Posts; User: UnFermentable

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    224

    This - Noritz makes a nice commercial grade unit....

    This - Noritz makes a nice commercial grade unit. If you're above 10hL/bbl then I'd look at the Hot Liquor Back solution Todd mentions.
  2. First, I would always recommend you contact the...

    First, I would always recommend you contact the HX manufacturer for their best practices recommendation. Generally, it is recommended to run your CIP solution in the reverse direction of normal flow...
  3. The lactose is where I was headed too, but you do...

    The lactose is where I was headed too, but you do have the potential downside of it being dairy. Just make sure you notify your customers it has lactose if you go that route. It is advantageous in...
  4. Replies
    13
    Views
    406

    Never had consistency issues with either, and...

    Never had consistency issues with either, and have compared them multiple times, but regardless your issue appears to be as I stated above. Not enough line restriction (tube diameter). You should be...
  5. Replies
    13
    Views
    406

    This is my suspicion, although most mobile...

    This is my suspicion, although most mobile canners I have met carry a Zahm or TapRite to test. Another possibility is not enough line restriction in the filling apparatus. (Filling too fast, causing...
  6. Itís refreshing to see someone ask a question...

    Itís refreshing to see someone ask a question while at the same time proposing their solution. Finally someone who wants to engage as opposed to being fed an easy answer.

    Yes that would be the...
  7. Replies
    13
    Views
    406

    Are you having issues canning out of the bright...

    Are you having issues canning out of the bright at 33*F? - I would think there may be more of an issue with the filling method if that is the case.

    As far as insulation, I have not had to DIY a...
  8. Replies
    13
    Views
    406

    Circulate your beer. The reality is that your...

    Circulate your beer. The reality is that your beer next to the tank wall is probably sub 33. That cold beer (or even ice) can act as an insulator and stop further thermal transfer deeper into the...
  9. Replies
    14
    Views
    1,905

    But everyone sure wants someone elseís hard work...

    But everyone sure wants someone elseís hard work for free - ROLL EYES.

    Why climb a mountain when I can stand on the backs of others?!?!
  10. Replies
    5
    Views
    196

    Okay okay, we realize you are advocating hard for...

    Okay okay, we realize you are advocating hard for Kernza. Hopefully they contributed a significant amount of dollars to get all this attention!
  11. Replies
    11
    Views
    636

    I completely understand about the temp dial being...

    I completely understand about the temp dial being small and hard to read for some. It could be larger for ease of use. I was going to call you out as a millennial for needing digital, but I would've...
  12. Replies
    5
    Views
    174

    Glad that link got you where you needed!

    Glad that link got you where you needed!
  13. Replies
    11
    Views
    636

    In my experience those cheap digitals are way...

    In my experience those cheap digitals are way less accurate than the mechanical analog type. I would not trust it myself, but if you are real anal just swap it with a type K TC and plug it in to your...
  14. Replies
    5
    Views
    174

    This is not really descriptive. It is a size...

    This is not really descriptive. It is a size reference, but does not give any context. Perhaps in your situation brass valve bodies with nylon seals are acceptable. I would not use that setup on a...
  15. Replies
    11
    Views
    636

    The TapRite comes with a quick-connect fitting to...

    The TapRite comes with a quick-connect fitting to the unit and a piece of bev-line. You may need to expand to another piece of tubing to fit over your sample valve, or you can source an independent...
  16. Replies
    5
    Views
    174

    This will be the case most of the time. You can...

    This will be the case most of the time. You can source some replacement seals, however if you are not looking for a significant volume, the cost will probably not make sense. If you find some cheap,...
  17. Replies
    4
    Views
    160

    Most any maltster will be willing to ship you a...

    Most any maltster will be willing to ship you a container volume. Soufflet or EuroMalt would be two options which I believe have production in or near Romania.
  18. Replies
    4
    Views
    222

    You should be able to pick up a cheap Watts...

    You should be able to pick up a cheap Watts option at the local Big Box. But for the forementiined reasons, I generally do not use one at all anymore. I personally opt to just add a 3/8 ball valve...
  19. Replies
    9
    Views
    3,375

    Oh yea and you can buy a duplex coupler to link...

    Oh yea and you can buy a duplex coupler to link your keg couplers on the cooler end.
  20. Replies
    9
    Views
    3,375

    FRV0001 Flojet Reversal Valve - It will allow you...

    FRV0001 Flojet Reversal Valve - It will allow you to run flow in reverse for cleaning. It doesnít make use of the beer pump. You just bypass and long-draw clean as normal when daisy-chaining. Place...
  21. Replies
    5
    Views
    221

    So I thought about this a bit more and the design...

    So I thought about this a bit more and the design could be a bit more dynamic than I originally explained. I really only referenced a vortex, but cavitation can be a major concern as well, but not...
  22. Replies
    5
    Views
    221

    It's one of those engineer features that's is...

    It's one of those engineer features that's is installed by over-thinkers with all the details ;) - This comment is totally in jest.

    I believe you are looking at a basic anti-vortex, designed to...
  23. Replies
    5
    Views
    421

    To piggy back on Philips comments, you can also...

    To piggy back on Philips comments, you can also run water in both directions of different dye colors to check for leaks or holes (mixing). Do it at flow and pressure. Check the "pack" depth of the...
  24. Replies
    4
    Views
    278

    You can buy a date coder, but they will probably...

    You can buy a date coder, but they will probably run you $1000+ for a reliable system. Smart Jet Plus? Domino A320i? Ska Fab? I've had a few Salty Lady's printed on by a Citronix CI3000? Those might...
  25. The environment isn't the problem, physics is!...

    The environment isn't the problem, physics is! But we're here to brain-storm, not to explain why this amazingly great free thinking idea won't work.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4