Search:

Type: Posts; User: Thirsty_Monk

Page 1 of 15 1 2 3 4

Search: Search took 0.04 seconds.

  1. You have to have physical address and building...

    You have to have physical address and building for the brewery. As they say “you can have it on the boat, you can not have it in the mote”.

    Before you spend any dollar, fully understand licensing...
  2. I know two breweries in my area that heat with...

    I know two breweries in my area that heat with oil. Equipment was provided by Minnetonka.

    One brewhouse is 5BBL the other one is 7BBL. Oil is heated with electricity. BK and HLT sits in oil bath...
  3. Are you talking electric oil heating brewhouse?

    Are you talking electric oil heating brewhouse?
  4. You already have a piping and all supporting...

    You already have a piping and all supporting vessels. Replacing boiler box is a small portion of over all boiler system.
  5. Any good HVAC company can fabricate and install...

    Any good HVAC company can fabricate and install make up and ventilation system for you.

    With 1 BBL brewhouse would opening a window or door address the issue in short term?

    To avoid running...
  6. You need another license to sell dog treats.

    You need another license to sell dog treats.
  7. Replies
    4
    Views
    508

    Anything changed with carbonation level?

    Anything changed with carbonation level?
  8. Replies
    4
    Views
    479

    I use about 1oz of hydrogen peroxide per 1 Gal of...

    I use about 1oz of hydrogen peroxide per 1 Gal of water (as an additive to caustic).
  9. Replies
    4
    Views
    544

    What is the difference between dock and van? ...

    What is the difference between dock and van?
    Can you drive forklift outside and load the van that way?
    Do you have more then one dock bay?
  10. Band saw or reciprocated saw.

    Band saw or reciprocated saw.
  11. Replies
    5
    Views
    1,891

    2 Roll vs. 4 Roll Mill

    Difference between 2 pair and 4 pair RMS mill was about 2k. I am not sure if top pair was spiral cut or not. I decided for 2 pair and RMS mill is doing fantastic job.
  12. Replies
    9
    Views
    988

    I think you need to pay attention to milling of...

    I think you need to pay attention to milling of the grain. Try this method
    http://www.craftbrewersconference.com/wp-content/uploads/ImprovingBrewhouseEfficiency-Havig.pdf
  13. Replies
    6
    Views
    551

    I am running brass faucets for many years and I...

    I am running brass faucets for many years and I suspect that shanks on my Foxx equipment towers are needs too. I do not think you will have any issue with brass shanks.
  14. Search for band-it tool.

    Search for band-it tool.
  15. Tips are considered your personal earnings (that...

    Tips are considered your personal earnings (that you have to report) and such can not be kept as a cash flow.
  16. Replies
    3
    Views
    659

    There is nothing wrong with caustic. Like any...

    There is nothing wrong with caustic. Like any other concentrated chemicals, It is corrosive and correct handling is important. The same is true about PBW or starsan.

    I would recommend you find...
  17. Replies
    6
    Views
    639

    Monster Mill

    Monster Mill
  18. As long as you take care of the yeast plug on the...

    As long as you take care of the yeast plug on the bottom of the fermenter you should be fine
  19. Replies
    3
    Views
    384

    Looks like you are missing head pressure on the...

    Looks like you are missing head pressure on the kegs to push the liquid out of the kegs. This could be compressed air or CO2.
  20. Johnson controller is on Glycol unit

    Johnson controller is on Glycol unit
  21. Replies
    4
    Views
    324

    Did you contacted your equipment manufacturer?

    Did you contacted your equipment manufacturer?
  22. Thread: CO2 Meter

    by Thirsty_Monk
    Replies
    3
    Views
    455

    Micro Matic has some CO2 monitors. ...

    Micro Matic has some CO2 monitors.

    https://www.micromatic.com/gas-equipment/detectors-and-safety-monitors-and-analyzers
  23. I do not know anything about the mill you...

    I do not know anything about the mill you mentioned but RMS mills are great.
    https://rmsroller-grinder.com
  24. Your local industrial electrical supplier will...

    Your local industrial electrical supplier will have them. They can be plastic or metal.
  25. ADA as a federal law will supersede any local and...

    ADA as a federal law will supersede any local and state laws.

    Local health department will tell you no dogs/animals in food establishment but ADA requires you to allow any service animals who are...
Results 1 to 25 of 367
Page 1 of 15 1 2 3 4