Search:

Type: Posts; User: augiedoggy

Page 1 of 6 1 2 3 4

Search: Search took 0.00 seconds.

  1. You may even want to consider 4 smaller elements...

    You may even want to consider 4 smaller elements something like these vs 3 larger ones depending on how your kettles are set up....
  2. I'm talking about the complete brew day including...

    I'm talking about the complete brew day including measuring out/grinding grain and cleanup with 2 people. I can see where we could shave an hour or 2 off if we had a dedicated brew area we didnt have...
  3. I'm talking about the complete brew day including...

    I'm talking about the complete brew day including measuring out/grinding grain and cleanup with 2 people. I can see where we could shave an hour or 2 off if we had a dedicated brew area we didnt have...
  4. so after doing some more reading on this I still...

    so after doing some more reading on this I still could be wrong, but im fairly certain stout is incorrect on this info they gave you... a 6000w 3 phase element should draw 8.3a from each phase of...
  5. I do not have 3phase power and am going on what I...

    I do not have 3phase power and am going on what I could find on electrical forums.
    also consider 5500w ulwd elements like the ripples I use as you can use 4 of them on 100a single phase (total of...
  6. Why do you think the brewing would require 200a?...

    Why do you think the brewing would require 200a? The only instance where that would be true is if someone wanted to do 12hr back to back brewdays on a single phases service.. even then for 2bbl it...
  7. So we have a 200a single phase service in our...

    So we have a 200a single phase service in our brewpub. I built a panel that utilizes 4 5500w single phase elements in each kettle and a rims tube of about 4,000w. they are setup with a NO/NC relay to...
  8. Just my 2 cents as someone who built an electric...

    Just my 2 cents as someone who built an electric system and went through a lot of trouble to make sure it was to code and why it should meet code.

    As far as making an extension cord out of 10awg...
  9. Replies
    3
    Views
    170

    have you tried homebrewtalk? it really depends on...

    have you tried homebrewtalk? it really depends on a number of things such as demensions of the kettle(s) and insulation if any as well as amount of liquid you will be heating and ambient temps.
    ...
  10. Replies
    5
    Views
    546

    I actually have the upgraded slotted bottom false...

    I actually have the upgraded slotted bottom false bottom on order along with some unitanks from sungood. We had to make our crush courser than on our pilot system which netted us 91% efficiency due...
  11. Replies
    10
    Views
    435

    currently we have seating for 40 but when we are...

    currently we have seating for 40 but when we are busy we have about 50 in our tasting room (we are expanding soon) if the space looks like it can hold 50 then the firemarshall will likely give you an...
  12. Replies
    5
    Views
    448

    I have only removed one manway gasket on our...

    I have only removed one manway gasket on our system (3bbl brite) and replaced it thus far but it did require some finesse while installing it into the square channel. you basically need to stretch...
  13. Replies
    5
    Views
    546

    It really all depends on the system and specifics...

    It really all depends on the system and specifics like mill crush gap.. we use beersmith with our 3bbl electrice sungood kettles and custom rims and have it dialed in at 85% efficiency but I know a...
  14. There are many options here that can be used with...

    There are many options here that can be used with an rtd... ranging from hundreds of dollars to some of the the cheap inkbird type hysteresis controllers (the $99 prewired inkbird pid box uses a 3...
  15. well the motor is only 170rpm so its not all that...

    well the motor is only 170rpm so its not all that fast Ive never times it to be honest but 8 months later it still looks new and works fine getting use every sunday.
  16. Replies
    5
    Views
    757

    same arm that came with my 3bbl sungood setup. I...

    same arm that came with my 3bbl sungood setup. I thought this sort of thing was losing popularity since it oxgenates the sparge water vs a regular hose on the mashbed?
  17. Replies
    6
    Views
    969

    The majority of the cost is due to supply and...

    The majority of the cost is due to supply and demand of UL listed control panels... if its just a pid based panel realistically its likely less than $1000 in hardware and the rest goes for assembly...
  18. I reassembled and tested everything with no...

    I reassembled and tested everything with no issues... It would have been "best" if thier were some sort of documentation with the unit or at least on thier website... I understand they dont make...
  19. Thread: Grain Mills

    by augiedoggy
    Replies
    6
    Views
    679

    We have both a mm3 (non pro) and the kegco 3...

    We have both a mm3 (non pro) and the kegco 3 roller and have decided to use the kegco 3 roller and keep the mm3 for backup. we have a 3 bbl system. We have motorized the kegco and have been using it...
  20. I have the same issue with my sabco chiller......

    I have the same issue with my sabco chiller... the numbers on the gaskets and plates where all way out of order some of the plates were numbered with a magic market and some were not.. I cannot find...
  21. Replies
    9
    Views
    981

    it really depends on how closely they look at...

    it really depends on how closely they look at your drawing since most of the breweries ive been too do what you are describing. But yeah, we had the license and when we went to make an amendment we...
  22. Replies
    2
    Views
    889

    Good to know on the tariff thing... My dealings...

    Good to know on the tariff thing... My dealings with Gavin were very positive too, The only thing that was a little unnerving for me was figuring out how to estimate my customs fees which wasnt so...
  23. Replies
    4
    Views
    346

    We might be able to provide more help if perhaps...

    We might be able to provide more help if perhaps you shared what element and housing your using? pics maybe?
  24. Just an update on this pump since Ive gotten a...

    Just an update on this pump since Ive gotten a lot of private messages about it and we've been using it for 6 months now.

    It has been working flawlessly for our needs so far. I have been...
  25. Replies
    9
    Views
    981

    We are in a similar boat... It took us over 2...

    We are in a similar boat... It took us over 2 years to open due to doing the renovations ourselves while working our day jobs and unforeseen delays from inspectors and such. Also the rules changed so...
Results 1 to 25 of 129
Page 1 of 6 1 2 3 4