Search:

Type: Posts; User: beerme

Page 1 of 6 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    4
    Views
    616

    have you tried safale S-33 dried yeast? It is...

    have you tried safale S-33 dried yeast?
    It is much less expensive and easy to use. I think it was about $90 for a brick at chrles faram
  2. Replies
    5
    Views
    1,957

    if you are running a 10/15 bbl system or less,...

    if you are running a 10/15 bbl system or less, and brewing 2-3 times per week it probably does not matter much.

    Also, if you doing a British style single step infusion mash it makes less sense,...
  3. I will see if i can find the original files i had...

    I will see if i can find the original files i had for our 12" x4 filter, but there are a few important things :

    Firstly they say don't use caustic or peracetic acid, and to store the filter with...
  4. rotameter

    I use a rotameter with a needle valve for flow control.

    i got them from Omega: ...
  5. Lets say the time for operations are: mash in ...

    Lets say the time for operations are:

    mash in 15 min
    mash rest 60 min
    runoff time 60 min

    Heat kettle 30 min
    Boil 60 min

    pump to whirlpool 10 min
  6. Replies
    13
    Views
    878

    send me a private message. i have just...

    send me a private message. i have just commissioned a brewhouse which i had built in boucherville, with a whirlpool that works well. if you can get to toronto, you can come see it.
  7. Replies
    4
    Views
    665

    put the carb stone in line with a triclamp tee...

    put the carb stone in line with a triclamp tee and other fitting as needed. transfer the beer through it into a keg.
    - keep the head pressure in the receiving keg above the equilibrium...
  8. Replies
    9
    Views
    967

    I have soaked carbonating stones in concentrated...

    I have soaked carbonating stones in concentrated nitric acid followed by autoclaving which works really well.
    It is dangerous stuff, use appropriate precautions etc.
  9. Replies
    12
    Views
    1,945

    I have built a new 30 Hl dual kettle Brewhouse...

    I have built a new 30 Hl dual kettle Brewhouse with a system from Montreal, a company called IAI-Inox. They make equipment for dairy and pharmaceutical industries as well and their fabrication and...
  10. Replies
    8
    Views
    6,024

    Both are among the better fabricators with...

    Both are among the better fabricators with longstanding reputations in the industry. I like Specific over Criveller both for design and for build quality. Specific were on my short list before i...
  11. Replies
    7
    Views
    1,588

    Reducing dms after the fact

    Sorry to hijack this thread but I have a parallel problem to address:

    I have a lager beer in my conditioning tank with slight but noticeable DMS aroma and flavour. I traced it back to a poor boil...
  12. Replies
    11
    Views
    3,408

    You buried the lead and i did not see it. ...

    You buried the lead and i did not see it.

    What is pressure on your flowjet? Turn it up?

    Look at tank temperature, cooler temperature, insulation on draught lines

    Good luck
  13. Replies
    11
    Views
    3,408

    You need to ensure that you maintain pressure at...

    You need to ensure that you maintain pressure at or above CO2 equillibrium pressure at all points along the line. When you open the faucet, the pressure just before it will drop a little because the...
  14. zahm and nagel chart

    check this handy chart out:
    http://www.zahmnagel.com/charts/

    it tells you carbonation in Vols for varying temperature/ pressures. For example if you want 2.70Vol at 36 F you will need an...
  15. Replies
    15
    Views
    2,311

    We prefabricated our 2" aquatherm headers in...

    We prefabricated our 2" aquatherm headers in sections and slid armaflex insulation on before putting them up. We put extra armaflex on and squeezed it together so we could stretch it back out over...
  16. Replies
    5
    Views
    1,333

    3 phase motors are built for industrial...

    3 phase motors are built for industrial applications and are generally more ruggedly made.

    If you have single phase power it is possible to get a vfd that will convert it to 3 phase to run a pump....
  17. think about air bubbles. if you run your...

    think about air bubbles.

    if you run your header lines above where the top jacket outlets are, then the air bubbles will tend to migrate up. You need to have a strategy to bleed the headers of air,...
  18. Replies
    3
    Views
    565

    take out the battery? what is the chinese word...

    take out the battery?

    what is the chinese word for reset anyways?
  19. Replies
    8
    Views
    1,993

    thanks for the feedback. When i worked in a...

    thanks for the feedback.

    When i worked in a brewery lab years ago, i spent time everyday peering into a microscope doing counts. my eyes did not like it then and i am older now.

    I think that...
  20. Replies
    7
    Views
    898

    At what temperature does the conversion from SMM...

    At what temperature does the conversion from SMM to DMS begin? My understanding is that beyond the threshold, the reaction proceeds faster at higher temperatures.
  21. Replies
    7
    Views
    898

    generally when wort is heated near boiling...

    generally when wort is heated near boiling temperatures, the dms precursor is converted to dms. As you boil you drive off the dms. Normally you would want to boil long and vigorously enough to...
  22. Replies
    8
    Views
    1,993

    digital microscope/ cell counting software

    Does anyone have recommendations or advice on digital microscopes?

    I want to do basic cell counts with a haemocytometer for yeast pitching to start, and may do basic staining for viability. More...
  23. WIld goose in line can filling tips and tricks?

    I made a search of probrewer and did not find a thread on this subject, but if you know of one, let me know.

    I have just started running a wild goose wgc250 conning machine (with ska depal) I have...
  24. Replies
    15
    Views
    2,570

    the information is that it is a poor idea, will...

    the information is that it is a poor idea, will take a very long time and not be very reliable.
  25. Replies
    15
    Views
    2,570

    can you pump out through a side port, run it...

    can you pump out through a side port, run it through an in line carbonation stone or venturi and then back in the bottom?
    if you have a side sample port, replace with a butterfly valve.
Results 1 to 25 of 138
Page 1 of 6 1 2 3 4