Search:

Type: Posts; User: TiminOz

Page 1 of 9 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    4
    Views
    314

    What is your level of brewing experience? Crude...

    What is your level of brewing experience? Crude equipment can produce good beer in the hands of a very experienced brewer, but on the hands of an inexperienced brewer, not so much.
  2. Replies
    3
    Views
    432

    Have you contacted the manufacturer? They should...

    Have you contacted the manufacturer? They should be able to give you some support if they are a commercial vendor.
  3. Replies
    3
    Views
    331

    The first question is what pressure are the tanks...

    The first question is what pressure are the tanks rated to?
  4. The Pro Brewer site attachment function always...

    The Pro Brewer site attachment function always gives me an error message. Send me your email in a PM and I'll send you dimensions.
  5. That is just a cheap coupler. The big difference...

    That is just a cheap coupler. The big difference is that you need to remove the check valve inside the coupler for use on a keg washer. This is using a standard Micro Matic (D) or (A) coupler.
  6. Replies
    6
    Views
    496

    Are you brewing single infusion or decoction...

    Are you brewing single infusion or decoction brewing. You only need a mixing paddle in a dedicated mash tun or in mash/kettle.
  7. Replies
    1
    Views
    420

    Yes! Medical and Dental insurance along with 3...

    Yes! Medical and Dental insurance along with 3 weeks paid vacation. They will be able to have fun due to not having to worry about the real stuff!
  8. Replies
    5
    Views
    469

    Shadowless manways are the standard for safe...

    Shadowless manways are the standard for safe tanks and you will get used to using them. Inspect the gasket for any imperfections, if it fits the without any wrinkling or buckles it should seal. Who...
  9. Replies
    4
    Views
    372

    As stated previously the standard method is to...

    As stated previously the standard method is to use two forklifts. The other option is have the container delivered by a side loader. They set it on the ground and you just pull it straight out with...
  10. Replies
    1
    Views
    390

    What is this for? Is that meant to go under a...

    What is this for? Is that meant to go under a kettle? In my way of thinking a fire box is the heat chamber under a direct fire brew kettle. It is completely enclosed and lined with ceramic rock wool....
  11. Replies
    17
    Views
    1,188

    Extremely Dangerous!! And most likely...

    Extremely Dangerous!! And most likely non-compliant with any local codes.
  12. Replies
    6
    Views
    1,139

    3bbl 6.51 Liters 0.75" BSPT 0.75" BSPT 5bbl 8.86...

    3bbl 6.51 Liters 0.75" BSPT 0.75" BSPT 5bbl 8.86 Liters 0.75" BSPT 0.75" BSPT 7bbl 13.7 Liters 0.75" BSPT 0.75" BSPT 10bbl 18.2 Liters 0.75" BSPT 0.75" BSPT 15bbl 22.1 Liters 0.75" BSPT 0.75" BSPT...
  13. Add 10% at the end of this month!

    Add 10% at the end of this month!
  14. If you want to have temp control on the mash side...

    If you want to have temp control on the mash side then you need a steam heated system with steam jackets on the mash tun or mash/lauter tun. Anything else is a waste of time.
  15. Do not use CO2 when checking for leaks!! It is...

    Do not use CO2 when checking for leaks!! It is very dangerous and only compressed air should be used. If this is a standard insulated tank then the outer shell is not pressure rated. The glycol...
  16. It would be more common to hear about a glycol...

    It would be more common to hear about a glycol jacket leak. Are there weep holes at the bottom of the cone? Usually this is the first place you spot leakage. This is also a handy spot to blow...
  17. A very simple solution is to divide the hours...

    A very simple solution is to divide the hours worked into the tip pool for both CC and cash tips. If you have a part time person serving pull all tips earned prior to their start time and again at...
  18. Replies
    8
    Views
    1,172

    Kegs are serially produced, meaning they are made...

    Kegs are serially produced, meaning they are made in an automated controlled manufacturing facility and not built one at a time by individual workers. Check out Thielman Portinox in Granada for...
  19. I think you have blown this out of proportion....

    I think you have blown this out of proportion. There is no way for you to know how the service dog comforts the person. And the breed makes zero difference. As long as the dog stays by the persons...
  20. I would consider plumbing the on demand water...

    I would consider plumbing the on demand water supply to your current HLT using a Warrick sensor for auto refill. I assume your HLT is plumbed to meet your CLT supply at a blending valve with a temp...
  21. Replies
    6
    Views
    1,838

    If you are using a jacketed BBT then you need to...

    If you are using a jacketed BBT then you need to run the beer through an insulated python into you cold room to a beer pump with a FOB and coupler hook up. This will allow a quality pour and be set...
  22. Replies
    8
    Views
    996

    The helix in a flex auger is not stainless steel,...

    The helix in a flex auger is not stainless steel, just steel. Anything used in the poultry industry in India should work fine. The key is to run a bag of un-milled grain through several times to...
  23. Replies
    8
    Views
    996

    You should be able to fit the Choretime 75 auger...

    You should be able to fit the Choretime 75 auger in that 3 feet of space with a very short flex tube to the hydrator. The key will to remove the tube once you mashed to prevent steam gumming the...
  24. Replies
    10
    Views
    1,272

    I would also guess that you have a bit grit...

    I would also guess that you have a bit grit trapped under the diaphragm or that it has worn out. If you rinse it in a stainless bowl or sink you should see the particle that is allowing the glycol to...
  25. Nick, I'll send you an email with a older...

    Nick,

    I'll send you an email with a older operations manual and a trouble shooting guide. There should be a data decal on the back with a serial number and build date which would be handy.
    ...
Results 1 to 25 of 224
Page 1 of 9 1 2 3 4