Results 1 to 2 of 2

Thread: Serving tank sight glass

  1. #1
    Join Date
    Feb 2003
    Las Vegas

    Question Serving tank sight glass

    I am looking for suggestions for replacing the tubing on my serving tanks that serves as the sight glass. I think it's 3/4" id. It is not the hard tubing attached with compression fittings you see on some tanks but just regular soft tubing attached with a worm clamp. My problem is that I replaced it with some TYGON tubing and the new tubing seems to accumulate more buildup and doesn't come clean as well as the original stuff, unfortunately I have not been able to find out what the original hose type was.\
    Any ideas?
    Big Willey
    "You are what you is." FZ

  2. #2
    Join Date
    Oct 2002
    Middle Coast
    Check with the local plumbing supply company for some ideas.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts